Оценок - , средний балл:
(
)
)
Производитель: Philips
Размер: 540.09 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
. When RDS time is read, "RDS TIME RDS TIMERDS TIMERDS TIMERDS TIMERDS TIME" is displayed and the current time will be stored. . If the RDS radio station does not transmit RDS time within 90 seconds, "NO RDS TIME NO RDS TIMENO RDS TIMENO RDS TIMENO RDS TIMENO RDS TIME" is displayed. Note: – Some RDS radio station may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS radio station. English 15 3140 115 29252 pg 001-021/M250/22-Eng 15 4/17/02, 5:00 PM Tape Operation / Recording English1 2 BAND DISPLAY MP3•ALBUM VOLUME PRESET TRACK•SEARCH•TUNEPROGRAM SOURCE TIMER SET CLOCK•RDS REC iR OPEN STANDBY-ON - + Tape playback 1 Select TAPE source. . The display shows “TAPE TAPETAPETAPETAPETAPE” briefly. 2 Press OPEN c to open the tape door. 3 Insert a recorded tape and close the tape door. . Load the tape with the open side downward and the full spool to the left. 4 Press EA to start playback. To stop playback . Press C. To reset the tape counter display . In stop mode, press C once. Rewinding / Fast forwarding Stop playback, press S or T (a or a). . The tape will stop automatically at the end of rewinding or fast forwarding. . During fast winding, you can monitor the tape message with the tape counter. Press C to stop rewinding or fast forwarding. Note: – During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or TUNER, for example). General information on recording . For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken.This deck is not suited for recording on METAL (IEC IV) type tapes. . The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND or DBB will not affect the recording in progress. . At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads. . To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape. IMPORTANT! Recording is permissible if copyright or other rights of third parties are not infringed upon. 16 3140 115 29252 pg 001-021/M250/22-Eng 16 4/17/02, 5:00 PM Tape Operation / Recording Preparation for recording 1 Select TAPE source. 2 Load a recordable tape into tape deck with full spool to the left. 3 Prepare the source to be recorded. CD – load the disc. TUNER – tune to the desired radio station. AUX – connect external equipment. When recording is in progress . REC starts flashing. . To stop recording, press 9. . It is not possible to listen to another source. . It is not possible to activate the timer function. Synchro start CD recording 1 Select CD source. . Press S or T (. or ™) to select the desired track to start recording. . You can programme the tracks in the order you want them to be recorded (refer to “CD/MP3CD Operations - Programming the disc tracks”). 2 Press REC to start recording. . Playing of the CD programme starts automatically from the beginning of the CD after 7 seconds. It is not necessary to start the CD player separately. One touch recording 1 Select CD, TUNER or AUX source. 2 If necessary, start playback of the selected source. 3 Press REC to start recording. Recording timer To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. 1 Select the preset radio station to record from (refer to “Radio Reception -Tuning to preset radio stations”). 2 In standby mode, press TIMER SET for more than two seconds. . flashes and a source is displayed. 3 Press SOURCE repeatedly until “REC TUN” source is displayed. 4 Press TIMER SET to confirm the source. . “SET ON TIME SET ON TIMESET ON TIMESET ON TIMESET ON TIMESET ON TIME” is displayed, and the clock digits for the hours flash. 5 Press VOLUME +/-to set the hours. 6 Press TIMER SET again. . The clock digits for the minutes flash. 7 Press VOLUME +/-to set the minutes. 8 Press TIMER SET to confirm the recording start time. . “SET OFF TIME SET OFF TIMESET OFF TIMESET OFF TIMESET OFF TIMESET OFF TIME” is displayed, and the clock digits for the hours flash. 9 Repeat steps 5-7 to set the finish time. 10 Press TIMER SET to confirm the timer settings. . is shown and the recording timer is now set. Note: – The recording timer will not be activated if the system is in tape play mode. English 17 3140 115 29252 pg 001-021/M250/22-Eng 17 4/17/02, 5:00 PM Clock/Timer English BAND DISPLAY MP3•ALBUM VOLUME PRESET TRACK•SEARCH•TUNEPROGRAM SOURCE TIMER SET CLOCK•RDS REC iR STANDBY-ON - + Clock setting There are two possible methods for setting the clock: manually or automatically by using RDS. Automatic clock setting Refer to page 15 on “Setting the RDS clock”. Manual clock setting 1 In standby mode, press and hold CLOCK•RDS. . The clock digits for the...