Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель MC-M350/22

Производитель: Philips
Размер: 1.34 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


. You can also press STOP 9 to cancel your play mode. Note: – If Shuffle is activated on a MP3-CD, all titles stored in the disc will be played in random order. Programming track numbers Program in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory. 1 Press PROG/ REV (or PROGRAM/ REV on remote control) to enter the programming mode. . A track number is shown and PROGRAM flashes. 2 Use the or (11 or 22 on the remote control) to select your desired track number. 3 Press PROG/ REV (or PROGRAM/ REV on remote control) to confirm the track number to be stored. . The number of tracks programmed is shown. 4 Repeat steps 2-3 to select and store all desired tracks. . MEMORY FULL is displayed if you attempt to program more than 40 tracks. 5 To star t playback of your disc program, press STOP 9 followed by or press directly. Erasing the program You can erase the program by: . pressing STOP 9 twice during playback; . opening the CD compar tment; . PROGRAM disappears from the display. . selecting another sound source English 13 Radio Reception English Tuning to radio stations 1 Select TUNER source. . TUNER is displayed briefly. 2 Press BAND (or DISPLAY on remote control) once or more to select your waveband (FM/ MW/ LW). 3 Press down TUNE or and release button. . The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH. . If a FM station is received in stereo, is shown. 4 Repeat step 3 if necessar y until you find the desired station. . To tune to a weak station, press TUNE or briefly and repeatedly until you have found optimal reception. Programming radio stations You can store up to a total of 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only program stations which are not in the memory already. 1 Press PRESET or to select the preset number where programming should star t. Note: – If no preset number is selected, default is preset (1) and all your presets will be overridden. 2 Press PROG/ REV (PROGRAM on remote control) for more than 2 seconds to activate programming. . AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW, LW. The last preset automatically stored will then be played. Manual programming 1 Tune to your desired station (see “Tuning to radio stations”). 2 Press PROG/ REV (PROGRAM on remote control) to activate programming. 3 Press PRESET or to allocate a number from 1 to 40 to this station. 4 Press PROG/ REV (PROGRAM on remote control) again to confirm the setting. . The preset number and the frequency of the preset station are shown. 5 Repeat the above four steps to store other stations. . You can override a preset station by storing another frequency in its place. 14 Radio Reception Tuning to preset radio stations . Press PRESET or until the desired preset station is displayed. RDS Radio Data System is a service that allows FM stations to show additional information. If you are receiving a RDS station, RDS and the station name are displayed. Scrolling through different RDS information . Press RDS / briefly and repeatedly to scroll through the following information (if available): – Station name – Programme type such as NEWS, SPORT, POP M ... – Radio text messages Note: – If you press RDS / and the signal is not available NO PTY TYPE is displayed. Searching programme type (PTY) PTY helps you find a desired programme type. To enable PTY, first programme RDS stations into the tuner memory (see “Programming radio stations”) 1 While receiving an RDS station, press RDS / briefly until the programme type is displayed. 2 Press PRESET or (on the remote control . or ™ ) until the desired programme type is displayed. 3 Press and hold down on TUNE or (on the remote control 11 or 22) to star t searching. . The radio tunes to a RDS station broadcasting this programme type. If the programme type is not available TYPE NOT FOUND is displayed. RDS Programme types NO YPE................ No programme type or undefined NEWS...................... Current Affairs AFFAIRS............ Affaires en Cours INFO...................... Information SPORT .................. Spor t EDUCATE............ Education DRAMA .................. Drama CULTURE............ Culture SCIENCE............ Science VARIED ............... Varied POP M................... Pop Music ROCK M................ Rock Music EASY M................ Easy Listening Music LIGHT M ............ Light classical Music CLASSICS ........ Serious Classical Music OTHER M ............ Other Music WEATHER............ Weather FINANCE............ Finance CHILDREN ........ Children’s programmes SOCIAL ............... Social Affairs RELIGION ........ Religion PHONE IN......... P...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории