Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
– When you receive RDS news or traffic announcements during CD playback, playback will pause and you will be able to hear the news/TA. Playback resumes after the broadcast has finished. In tape mode, the tape continues playing but you will hear the news/TA only until the broadcast has finished. – If you are using the RDS NEWS announcement with an EON station, the whole network is searched for the respective news. Disarming RDS News and Traffic Announcement There are a number of ways to disarm the news feature: . Press NEWS/TA on the remote control during reception of the news option. . Press 2 STANDBY ON on the system or remote control. . Tune to a non-RDS-station. 16 Tape Operation / Recording SIDE A/BCLOCK RDSTIMER ON OFF PREV NEXT STOP iR PLAY•PA U S E RECORD SOURCE SELECT SHUFFLESTANDBY-ON PROGRAM REPEAT REV MODE BAND Tape playback 1 Select TAPE source. . The display shows TAPE briefly. The tape counter TAPE 000 display with the SIDE A or SIDE B and reverse mode status are then shown during tape mode. 2 Press OPEN to open the tape door. 3 Inser t a recorded tape and close the tape door. . Load the tape with the open side downward and the full spool to the left. 4 Press PLAY•PAUSE 2; (on the remote control 2;) to star t playback. 5 By pressing .1 or 2™ on the system (on the remote control a or a), fast winding of tape is possible in both directions. . During fast winding, you can monitor the tape message with the tape counter. 6 To stop the tape, press STOP 9 . . To reset the tape counter, press STOP 9 again. Note: – The sound source cannot be changed while recording a tape. Switching tape sides The tape side can be switched manually or automatically before or during tape playback. . Press SIDE A/B (during playback only 2; on the remote control). . The display shows SIDE A or SIDE B and the tape counter resets to 000. Reverse mode options . Press REV MODE repeatedly to select your option; a : playback stops at the end of the tape. : both sides are played once. : both sides are played repeatedly, up to 5 times each side. General information on recording . Recording is permissible insofar as copyright or other rights of third par ties are not infringed. . For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken.This deck is not suited for recording on METAL (IEC IV) type tapes. . The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND, DBB or INTERACTIVE SOUND controls will not affect the recording in progress. . At the ver y beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads. . To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape. English 17 Tape Operation / Recording English Synchro start CD recording 1 Select CD source. 2 Inser t a disc and if desired, programme track numbers. 3 Press OPEN to open the tape door. 4 Inser t a suitable tape into the deck and close the tape door. 5 Press RECORD to star t recording. . COPY or RECORD is displayed briefly and RECORD is shown during recording. . Playing of the CD programme star ts automatically from the beginning of the CD after 7 seconds. It is not necessary to star t the CD player separately. . If you wish, press CLOCK once to monitor the counter display. 6 To stop recording, press STOP 9. Recording from the radio 1 Tune to the desired radio station (see “Tuning to radio stations”). 2 Press OPEN to open the tape door. 3 Inser t a suitable tape into the deck and close the tape door. 4 Press RECORD to star t recording. . RECORD is displayed briefly and RECORD is shown during recording. . If you wish, press CLOCK once to monitor the counter display. 5 To stop recording, press STOP 9. Recording from Aux 1 Select AUX source. 2 If necessar y, prepare the additional appliance for recording. 3 Press RECORD to star t recording. . RECORD is displayed briefly and RECORD is shown during recording. . If you wish, press CLOCK once to monitor the counter display. 4 To stop recording, press STOP 9. Recording timer To record from the radio, you will need to use a preset radio station and to set a star t (ON) and finish (OFF) time. 1 Inser t a suitable tape into the deck. . If desired, select tape reverse mode option. 2 Select the preset radio station to record from. 3 Press TIMER ON•OFF for more than 2 seconds. . TIMER flashes and a source is displayed. 4 Press SELECT SOURCE repeatedly, or turn VOLUME clockwise until REC TUN source is displayed. 5 Press TIMER ON•OFF to confirm the source. . SET ON TIME is displayed, TIMER and the clock digits for the hours flash. 6 Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. 7 Press TIMER ON•OFF again. . The clock digits for the minutes flash. 8 Turn VOLUME to set the mi...