Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install remote control battery Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of product damage! When the remote control is not used for long periods, remove the batter y. For first-time use: • Remove the protective tab to activate the remote control batter y. To replace the remote control battery: 1 Open the batter y compar tment. 2 Inser t one CR2025 batter y with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Connect power Caution • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the head of the AC power cord. • Risk of electric shock! When you unplug the power cord, always pull the plug from the socket. Never pull the cord. Note • Before you connect the AC power cord, make sure that you have completed all the other connections. • Connect the AC power cord to • the ~ AC IN socket on this unit. • the wall power socket. EN 9 Turn on 1 Turn the POWER ON/OFF switch on the back panel to the | position. 2 Press . » The unit switches to the last selected source. Switch to standby mode • Press to switch the unit to standby mode. » The backlight on the display panel turns off. 10 EN EN 11 4 Play Basic play operations You can control play through following operations. Function Action To stop play press MENU/ . To pause/resume play press . To skip to a track press / . To search during play press and hold / , then release to resume normal play. Play disc Warning •• Never touch a disc when it is still rotating! Note •• Make sure that the disk contains playable audio content. 1 Press SOURCE repeatedly to select the disc source. 2 Press PUSH on the front panel to open the disc compartment. 3 Load a CD/MP3 disc with the printed side facing up, then press PUSH again to close the disc compartment. »» [READING] (reading) is displayed for a while, then play starts automatically. Play from USB Note •• Make sure that the USB device contains playable audio content. 1 Insert a USB mass storage device into the USB DIRECT socket. 2 Press SOURCE repeatedly to select the USB source. »» [READING] (reading) is displayed for a while, then play starts automatically. Play options Repeat and shuffle play • Press MODE repeatedly to select: • [RPT1] (repeat one): play the current track repeatedly. • [RPT ALL] (repeat all): play all tracks repeatedly. • [SHUFFLE] (shuffle): play all tracks randomly. • [RPT SHUF] (repeat shuffle): play all tracks repeatedly in random order. • [NORMAL] (normal): resume normal play. Listen through headphone • Plug a headphone into the socket on the top panel. 12 EN 5 Listen to radio Tune to radio stations Note • To improve FM reception, fully extend and adjust the position of the FM antenna attached to the back panel. 1 Press SOURCE repeatedly to select the FM tuner source. 2 Press and hold / for three seconds. » The Hi-Fi system tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a weak station: 1 Press / repeatedly until you find optimal reception. Store radio stations Note • You can store a maximum of 20 FM radio stations. 1 Tune to a radio station. 2 Press MODE to activate programming. 3 Press Preset +/- to allocate a number from 1 to 20 to this radio station, then press MENU/ to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat the previous steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station • In tuner mode, press Preset +/- repeatedly to select a preset radio station. EN 13 6 Adjust sound Adjust speaker volume • During play, press Volume +/-to increase/ decrease speaker volume. Select a sound effect Note • You cannot use different sound effects at the same time. Boost sound power This feature allows you to give an instant boost to the sound power. • Press MAX SOUND on the top panel to turn on or off instant power boost. Select a preset sound effect The DSC (Digital Sound Control) feature allows you to enjoy special sound effects. • During play, press DSC on the top panel repeatedly to select: • [JAZZ] (jazz) • [POP] (pop) • [TECHNO] (techno) • [OPTIMAL] (optimal) • [ROCK] (rock) • [USER EQ] (user equalizer) Enhance bass The best DBB (Dynamic Bass Enhancement) setting is generated automatically for each DSC selection.You can manually select the DBB setting that best suits your listening environment. • During play, press DBB on the top panel repeatedly to select: • DBB 01 • DBB 02 • DBB 03 • DBB off Select an audio output mode • Switch CHANNEL CONTROL at the back panel to one of the following positions: • RR: Audio ou...