Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
to search backward/forward. for Tuner .................... to tune to a lower or higher radio frequency. for Tape ...................... to rewind or fast forward. for Clock ................... (on the system only) to set the hour. STOP C for CD/MP3-CD/USB to stop playback or to clear a programme. for Tuner .................... (on the system only) to stop programming. for Tape ...................... to stop playback or recording. for Demo .................. (on the system only) to activate/deactivate the demonstration. for Clock ................... (on the system only) to exit clock setting. for Plug & Play ........ (on the system only) to exit plug & play mode. EA for CD/MP3-CD/USB to star t or interrupt playback. for Tape ...................... to star t playback. for Plug & Play ........ (on the system only) to initiate and start plug & play mode. TITLE-/+i/e PRESET for MP3-CD/USB . to select previous/next title. for CD ........................ to skip to the beginning of the current, previous, or next track. for Tuner .................... to select a preset radio station. for Clock ................... (on the system only) to set the minute. 5 DSC – Selects different type of preset sound equaliser settings. (OPTIMAL, JAZZ, ROCK or TECHNO) 6 VAC – Selects different type of ambience-based equaliser settings. (HALL, CONCERT or CINEMA) 7 DBB/INC. SURR (DBB/IS) – to select the desired bass boost level. (DBB 1, DBB 2, DBB 3 or DBB OFF) – to activate or deactivate the surround sound effect. 8 MAX SOUND (MAX) – to activate or deactivate the optimal mix of various sound features. 9 REPEAT – to playback track(s)/disc(s)/programme repeatedly. 0 SHUFFLE –Turns on/off the random play mode. 10 Controls ! DIM – to select different brightness for the display screen : DIM 1, DIM 2, DIM 3 or DIM OFF. @ OPEN 3 – to open the tape deck door. # PROGRAM for CD/ MP3-CD . to programme disc tracks. for Tuner .................... to programme preset radio stations. for Clock ................... to select 12- or 24-hour clock mode. $ n – to connect headphones. % MASTER VOLUME (VOL -/+) – to increase or decrease the volume. ^ IR SENSOR – sensor for the infrared remote control. & RECORD/NEWS (REC) – to hear News automatically. – to star t recording on tape deck 1 or 2. * AUTO REPLAY/RDS (A. REPLAY) – to select RDS information. –to select continuous playback in either AUTO REPLAY or ONCE MODE only. ( Disc tray ) OPEN•CLOSE – to open or close the disc tray. . DISC CHANGE –to change disc(s). ™ Display screen – to view the current status of the system. . SLEEP – to activate/deactivate or set the sleep timer. . MUTE – Mutes or restores the volume. . TIMER ON/OFF – activates/deactivates the timer function. § DISPLAY – to display the album and title name for MP3 disc. . Tape deck 1 • Tape deck 2 . CLOCK•TIMER (CLK/ TIMER) – to view the clock. . USB DIRECT – jack for the external USB mass storage device. Notes for remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (CD or TUNER, for example). – Then select the desired function (E, i, e, for example). English 11 12 English Basic Functions IMPORTANT! Before you operate the system, complete the preparation procedures. Plug and Play (for tuner installlation) Plug and Play allows you to store all available RDS stations and radio stations automatically. First time setup/power up 1 When you turn on the main supply, "AUTO INSTALL - PRESS PLAY" is displayed. 2 PressEA on the system to start installation. . "PLUG AND PLAY" .... "INSTALL" is displayed, followed by "TUNER" and "AUTO". . PROG starts flashing. . The system will automatically store the radio stations with sufficient signal strength, starting from all RDS stations and followed by FM and MW bands respectively. Weak RDS stations may be stored in later presets. . When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station (or the first available RDS station) will be played. 3 The system will proceed to set the RDS clock if the first preset is an RDS station. . "INSTALL" is displayed, followed by "TIME" and "SEARCH RDS TIME". . When RDS time is read, "RDS TIME" is displayed and the current time will be stored. . If RDS station does not transmit RDS time within 90 seconds, the programme will exit automatically and the display will show “NO RDS TIME”. . If the first preset is non-RDS station; . The programme will exit automatically. To reinstall Plug and Play 1 In standby or demonstration mode, press and holdEA on the system until "AUTO INSTALL - PRESS PLAY" is displayed. 2 PressEA again to start installation. . All previously stored radio stations will be replaced. To exit without storing the Plug and Play . Press Con the system. . If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again. Notes: – When the power is turned on, the disc tray ma...