Оценок - 3, средний балл: 4 ( )

Производитель: Kenwood Размер: 2.13 mb Название файла: Язык инструкции:

A station has been preset but it cannot be received by pressing the P.CALL key. OThe frequency of the preset station is not tunable. OThe preset memory has been cleared because the power cord has been unplugged for a long period. OPreset stations with tunable frequencies. OPreset stations again. . . Demonstration starts suddenly. OThe power plug was unplugged from the outlet while the power switch was ON, or there was a power failure. OThis is not malfunction. Press the DEMO key to cancel the demonstration. P Power is turned OFF suddenly. OThe AUTO POWER SAVE function is activated. OCancel the AUTO POWER SAVE function. . An error message is displayed (ERROR * (figure)) OThere is a certain trouble. The displayed figure is variable depending on the details of the trouble. OPlease consult your nearest KENWOOD service station. Knowledge sections 71In case of difficulty 71In case of difficulty XD SERIES (En/E2) Cassette deck unit Symptom Cause Remedy Sound cannot be produced by pressing OCords are connected improperly. OConnect cords properly by referring to “Con6 the play key or no operation occurs even nections”. when an operation key is pressed. OThe head is dirty. OThe tape is wound too tight due to irregular winding. OA nonrecorded tape is played. OClean the head referring to “Maintenance”. OTry another tape. OPlay a recorded tape. O No operation occurs even when an operation key is pressed. OThe cassette holder is not closed completely. OThe operation key is pressed immediately after closing the cassette holder. OThe operation key is pressed in less than 4 seconds after turning the power ON. OA tape is not inserted in the unit. OThe tape is wound too tight due to irregular winding. OThe tape is fully wound to one of the reels. OClose the holder completely. OPress operations keys in more than a few seconds after closing the holder. OPress operation keys after waiting for more than 4 seconds. OInsert a tape. OTry another tape. OChange the tape transport direction or reverse the tape insertion orientation. § § The DPSS malfunctions. OThe tape used is not suitable for DPSS, for example the spaces between tunes may be too short. ORefer to “Searching for the desired music program (DPSS)”. • The CCRS does not function. OA recordable tape is not present in deck B. OA disc is not present in the CD player. OThe disc is dirty. OThe system control code is not connected. OInsert a recordable tape in deck B and retry operation. OPlace a disc in the CD player and retry operation. OClean the disc, place it in the CD player and try the operation again. OConnect the system control cord. ¤ 6 In dubbing, the tape stops at different moments in decks A and B. OThis is due to the difference in the tape length or characteristics of the mechanisms of two cassette decks. OSmall time difference does not mean a malfunction. The cassette holders cannot be opened by pressing the PUSH OPEN area. OThe key is pressed during recording or playback. OThe microcomputer is malfunctioning due to external noise. OPress in stop mode. OReset the microcomputer. . Sound is harsh or high frequencies are not reproduced. OThe head is dirty. OThe tape is stretched or shrunk. OClean the head referring to “Maintenance”. OTry another tape. O Sound is distorted. OThe recording level is not adjusted properly. OThe tape being played was recorded with distorted sound. OA tape which has been recorded by applying the equalizer or SRS 3D effect is being played by applying the same effect again. ORead the section entitled “Recording”. OTry another tape. OSwitch the equalizer and SRS 3D effects off. ¤ O P Noise is noticeable. OThe tape head is magnetized. OExternal noise is induced. OA tape recorded with Dolby NR ON is played with Dolby NR OFF. ODemagnetize the head referring to “Maintenance”. OInstall the system at a distance from other electric appliances and TV. OSet the Dolby NR to on. O ¶ Sound vibrates. OThe capstans or pinch rollers are dirty. OThe tape is wound irregularly. OClean the head referring to “Maintenance”. OWind the tape again by fast forwarding, rewinding or playing from an end to the other. O ¶ Recording cannot be started by pressing the record key. OThe recording protect tab of the cassette has been broken. OThe cassette holder is not closed completely. OThe TAPE input is selected. OThe tape is fully wound to one of the reels. OUse a cassette with an unbroken recording protect tab or block the hole. OClose the holder completely. OSelect the source to be recorded with the input selector key. OChange the tape transport direction of deck B or reverse the tape insertion orientation. 5 ‹ § Knowledge 72 In case of difficulty 72 In case of difficulty XD SERIES (En/E2) Amplifier/Speaker unit Symptom Cause Remedy Sound is not produced. OThe speaker cords are disconnected. OThe volume control is set to the minimum position. OThe MUTE switch of remote control unit is switched ON. OThe headphone plug is inserted into the jack. OConnection cords of the sys...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: