Оценок - 2, средний балл: 5 ( )

Производитель: Kenwood Размер: 1.12 mb Название файла: Язык инструкции:

5533 44 22 11 Basic section 11 A 1. Load a cassette tape. (Recording is available on deck B only.) . Differentiation between normal 1 Open the cassette holder (TYPE ) and high (TYPE ) tape is of deck B. set automatically. PUSH 2 Insert a tape. OPEN . Remove tape slack before load 3 Close the door. ing. 2. Select the tape transport direction. 22 To reverse the transport direction 1 Select deck B by pressing the TAPE B key. 2 Press the TAPE B key so that the desired direction indicator appears.™ 3 Stop playback (by pressing the 7 key). . When recording is started, the tape is transported in the direction selected in this step. . Wind the tape to the position where recording is to be started. REVERSE 3. Set the recording condition. MODE 33 Select the reverse mode. . . The Tape Equalizer cannot be used in recording. 29Let's record 29Let's record To pause recording (Main unit only) Lights REC/ARM B . Pressing the key pauses recording after leaving a non-recorded space of about 4 seconds. . If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. Selection of the reverse mode REVERSE MODE Each press switches the modes as follows. 1 “ ” .... Recording stops after having recorded both sides of tape. 2 “ ” ... Recording stops after having recorded both sides of tape. 3 “ ” ..... Recording stops after having recorded one side of tape. . When the “2” transport direction indicator is lit, recording always stops after having recorded one side of tape. Select an input source other 4. Select the source to be recorded. than “TAPE A or B”. Press the desired key. Basic section 44 CD01 1:12 The input source component to be recorded should be displayed. . If a disc has already been loaded when the CD input is selected, it will starts to play automatically. In this case, press the stop (7) key to stop it. . When you select DVD/VIDEO (External input), adjust the input level. t 5. Start recording. REC/ARM 1Start recording. 55 2Play (or tune) the input source to be recorded. . If a disc has already been loaded B Lights when the CD input is selected, it will starts recording automatically. . Even if deck A is selected, it is automatically switched to deck B at the start of recording. . Recording stops automatically when the tape side(s) to be recorded have been fully recorded. . Press the stop (7) key of the cassette deck unit to stop recording (see the next page). 30 Let's record 30 Let's record Tips in CD recording When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the same time as the CD starts to be played (synchronous recording function). 1Set the CD player in pause mode. 2Select the track to be recorded with the skip (4, .) keys. (The CD player pauses at the beginning of the selected track.) 3Put the cassette deck in Record-pause mode. (Press the REC/ARM key twice.) 4Start playing the CD. (Synchronous recording starts.) . Recording stops when the stop (7) key of the CD player is pressed. To stop the CD playback, press the stop (7) key again. Basic section Beat cancel function (For U.K.) There may be cases in which beat noise interferes with recording of AM(MW)/ LW broadcasting. In such a case, press the TAPE EQ. key during recording to reduce or suppress the beat noise. TAPE EQ. 31Let's record 31Let's record Copying tape (Tape dubbing) The contents of the tape in deck A can be copied onto the tape in deck B. 1 Select “ ” (double-side recording) or “ ” (one-side recording). . 2 Select “Tape Dubbing”. Playing tape Recording tape Load tapes in the decks. +Scrolled display (Tape Dubbing) The following items can be selected by turning the MULTI CONTROL jog dial. “Recording Options” “Tape Dubbing” “Audio Options” “Clock Options” “Language Options” AA REVERSE MODE SELECTMENU TiapeDubbMULTI CONTROL Basic section . Dubbing ends automatically when the side(s) to be dubbed has been fully recorded on. 3 Use the same tape transport directions. 4Start dubbing. (1) Select the transport direction of deck A. (2) Select the transport direction of deck B. . When recording is started, the tape will be transported in the direction selected in this step. ( > :side A, < : side B) +Scrolled display (Deck A Play Direction) +Scrolled display (Deck B Record Direction) +Scrolled display (Press 'ENTER' to Start) SELECT ENTER SELECT DaeckAPlAdeck> DceckBReBdeck> PTress'ENMULTI CONTROL MULTI CONTROL To stop dubbing . The deck B will stop after creating a non-recorded portion of about 4 sec, and then the deck A will stop. . Dubbing can also be stopped by pressing the stop (7) key of the cassette deck unit. Note that the non- recorded space is not created in this case. The TAPE EQ. key is ineffective during dubbing. REC/ARM 32 Playback of CD 32 Playback of CD Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. (Max. 32 titles)...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: