Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации Kenwood, модель HM-535

Производитель: Kenwood
Размер: 1.32 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


. Adjusting the tone while the "LOUD" or "EX.BASS" indicator is lit turns it off and cancels the sound enhancement mode. 15 EN Playback of CD When a disc is placed into the CD player in advance, the unit will be switched on automatically by pressing the CD 6 key, and playback will start. Start playback/ To pause playback Skipping tracks Playback from desired track To stop playback To stop playback To fast forward and Skipping tracks backward 1. Load a disc. 1 Press the ) key. The label side 2 Place a disc. facing up. 3 Press the ) key. . Do not touch the played side of disc. . Be sure to place a disc horizontally. Placing it with an inclination will result in malfunction. 2. Start playback. Elapsed time of track being played . After a few seconds, play starts from track No.1. Track No. being played 16 EN Playback of CD Playback of CD Remote control unit only 1TUNING Backward 1 Forward CD 6 search search . Each press pauses and plays the CD alternately. To stop playback AUTO/MONO STOP 7 Playback from desired track Remote control unit only Select the desired track No. 5 2 8 0 6 3 9 4 1 7 10 Press the numeric keys as shown below.... To select track No. 23 : +10 X 2, 3 To select track No. 40 : +10 X 4, 0 Time display on CD player . Press and hold one of the keys during playback. Normal playback resumes at the point where the key is released. Skipping tracks 4 P.CALL To skip To skip backward forward . The track in the direction of the key pressed is skipped, and the selected track will be played from the beginning. . When the 4key is pressed once during playback, the track being played will be played from the beginning. . To skip further to a track located before the current track, press the 4 key quickly. . Tracks can be skipped by pressing the 4or . key even when the CD is in stop mode. In this case, playback starts automatically from the point reached by skipping. Eject the CD 4 . The CD tray will open. (Pressing the key again closes the CD tray.) Each press of the TIME DISPLAY key changes the displayed contents. 1Elapsed time of track being played 2Remaining time of track being played ("REMAIN" lights up) 3Elapsed time of entire disc ("TOTAL" lights up) 4Remaining time on entire disc ("TOTAL REMAIN" lights up) . Only time information 1 and 2 can be displayed dur- ing single-track repeated playback or random playback. . In the program mode, display 3 shows the elapsed time of the entire program and display 4 shows the remaining time of the entire program. . When the displayed time is 200 minutes or more, the display shows "– – : – –". or (For U.K. and Europe) (For other countries) TIME DISPLAY .PTY.TIME DISPLAY Remote control unit only 17 EN Playback of TAPE Playback of TAPE If you load a tape in the cassette deck in advance while the power is off, pressing the TAPE 23 key will turns the power on automatically and starts the tape playback. Selection of TAPE equalizer (TAPE EQ.) To stop playback To wind tape Start playback Start playback To stop playback To wind tape at high speed at high speed 1. Load a cassette tape. 1 Press the area marked ) push open to open the cassette holder. 2 Insert a tape. 3 Press the area marked ) push open to close the cassette holder. Do not use a cassette with more than 90-minute recording time, for the tape used with such a cassette is very thin and tends to cause troubles such as entanglement around the pinch roller or cutting off tape. . The tape deck of the unit can play Normal (Type ) tapes. . When there is a tape slack, wind the tape before loading. r 2. Start playback. Press the TAPE 23 key. Displayed when the deck is loaded with a tape. Tape counter Reverse mode indication Transport direction indicators Transport direction indicators: Indicates the tape transport direction during playback or recording by lighting of 2 or 3. This direction is the direction stored in memory when the tape was last stopped. 18 EN Playback of TAPE Playback of TAPE To fast wind in To fast wind in direction | direction \ 11TUNING . Press the STOP 7 key to stop fast winding. . The same operation is also available with the 4 and . keys on the main unit. Selection of TAPE equalizer (TAPE EQ.) When playing a tape prerecorded with Noise Reduction system (such as the DOLBY NR) ON, be sure to set the "TAPE EQ." ON for playback. Lit when "TAPE EQ." is ON TAPE EQ. Each press switches the modes as follows. 1 "TAPE EQ." ON (TAPE equalizer is used) 2 "TAPE EQ." OFF (TAPE equalizer is not used) . Select the "TAPE EQ." ON mode according to the recording condition of the tape. To stop playback AUTO/MONO STOP 7 Selection of reverse mode Main unit only 1 Select "TAPE RVS". \ \\ \ \\ 2 Select. 1 " " : (ONE-WAY) Only one side is played back (recorded), and then the tape stops. 2 " " : (REVERSE) Both sides are played back (recorded), and then the tape stops. When the tape transport direction is "2", the tape stops after one side has been played (recorded).) 3 " " : (ENDLESS) Both sides are played back endlessly. (T...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории