Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Kenwood, модель HM-353V

Производитель: Kenwood
Размер: 1020.25 kb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


When a disc containing various data, for example a CD Graphic or CD-TEXT is loaded in the unit, the unit cannot play other data than the audio signal data. CD-R The CD-R records digital data of music CD or other source without compression so it can be played back at equivalent high quality to commercially marketed CDs. In addition to the above, this unit may also be incapable of playing certain CD-R discs depending on the recording characteristics of recording equipment (including the pickup), properties of the CD-R in use, its recording condition and so on. MP3 files . Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media. . Check to ensure that the saved file can be played back normally. . MP3 files on which the session has not be closed or finalized can not be played back with this unit. . There are cases where playback is not possible when MP3 files and music CD information (CD-DA) are saved on the same media. VIDEO CD This is a CD with recorded moving images. By compressing the video information to 1/120 and the audio information to 1/6, recording of up to 74 min is possible on discs with the same 12 cm diameter as general audio CDs. Two types of discs are being marketed (without PBC) for simple playback and (with PBC) with menus and special playback (playback control). This unit can be used for playback of VIDEO CDs of both types. Explanation of terms Character indications on the TV screen To constantly display character information on the TV screen, select "OSD ON". Each press of the key alternates the setting. 1 "OSD ON" .....Displays executed operation, track number and time. 2 "OSD OFF"....Only displays executed operation. ON SCREEN Remote control unit only Key error display If a wrong key is pressed when operating the unit, a hand mark is displayed at the top left corner of the TV monitor screen. 15 Before playing a disc 15 Before playing a disc 1Check the display format of your TV. 2Press the key to scroll the current TV format display. To change the TV format, press the key again while the TV format display is being scrolled. The TV screen display and disc signal formats can be classified roughly into two types (NTSC, PAL) depend- ing on the countries and regions. Therefore, it is nec- essary to set the NTSC/PAL switch of this unit accord- ing to the TV format (country or region) and disc. TV formats of major countries TV format PAL NTSC Countries, regions China, North Korea, UK, Germany, Australia, New Zealand, Kuwait, Singapore, etc. Japan, Taiwan, Korea, USA, Canada, Mexico, Philippines, Chile, etc. Each press of the key cyclically changes the setting. 1"AUTO" ......Switches automatically (Factory setting) 2"PAL" .......... PAL format 3"NTSC" ....... NTSC format When your TV is compatible only with the NTSC format With certain VIDEO CDs, the playback picture may be cut above and below it (as shown on the right). This is because the disc has been recorded in the PAL format. The screen may be somewhat hard to see but this is not malfunction. When your TV is compatible only with the PAL format With certain VIDEO CDs, the playback picture may have black spaces above and below it (as shown on the right). This is because the disc has been recorded in the NTSC format. The screen may be somewhat hard to see but this is not malfunction. When your TV is switchable between NTSC/PAL Try play a disc. If the picture is black and white or as shown on the right, stop playback and switch the screen display formats of this unit and the TV to another format. This will improve the played picture quality. Screen display examples of various TV formats . The screen display may be disturbed during switching. This is not a malfunction. NTSC PAL Switching AUTO/PAL/NTSC AUTO PAL NTSC AUTORemote control unit only 16 Basic use method 16 Basic use method Bass and treble compensation Muting the sound temporarily The system is switched ON and STANDBY 11 22 33 Bass and treble Tone adjustment Listening through headphones compensation 1.Set the Power key to ON. Pressing the Power key when the unit is ON turns it off (Standby mode of power). . Pressing the TUNER FM/AM, CD 6, TAPE23 or AUX key also turns power on and starts playback (reception) of the corresponding input. (Onetouch operation) . When the CD or TAPE input is selected while the corresponding disc or tape has been loaded, it immediately starts to play. Basic section 11 Example: To select the CD input CD 6 22 2.Selecting the desired input. CD (CD-DA, VIDEO CD and MP3 file) *fi‡ TAPE . TUNER (Broadcasts) . AUX (External input) [Adjusting the AUX input level e] CDCD-DA When CD (CD-DA) has been selected. . Pressing the TUNER FM/AM, CD 6 , TAPE23 or AUX key selects the corresponding input. 3.Volume adjustment. The volume The volume Volume display . The display shows a reference value. decreases increases volume / multi control 33 VOLUME12 17Basic use method Listening through headphones Tone adj...

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории