Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
button (4 or . SEARCH/ TUNING button on the remote control) to start searching. Notes: • Under certain receiving conditions, it may take more than 1 minute to complete the search. • If the desired program type cannot be found, “NO MATCH” is displayed, then after several seconds the display returns to the original display. Using the cassette Playing a cassette tape 1 Press TAPE button to TAPE. 2 Press push open button to open the cassette compartment door. 3 Insert cassette tape into the compartment with the open edge facing down and the full reel on the left. 4 Close the door securely. 5 Press 4 or . button to move tape to the desired starting point. 6 Press 6 PLAY/PAUSE button to begin playing the tape. 7 Press volume buttons (VOLUME + or – button on the remote control) and EQ/X-bass button (EQ/X-BASS on the remote control) to desired listening level. Recording on a cassette tape You can record from the radio or the CD player. For best recording, use normal bias tape (Type 1 only). Recording from the radio 1 Insert a cassette tape into the tape deck and close door. 2 Press TUNER/band button (TUNER/BAND button on the remote control) to TUNER and select a radio station. 3 Press rec button (REC/DEMO button on the remote control) to set the unit into recording standby mode. “REC “ and the icon “REC.” appears on the display. 4 Press 6 PLAY/PAUSE button to begin recording. 5 Press 7 STOP button to end recording. 6 To turn off radio, press TAPE button to TAPE. Radio recording tip •To temporarily pause the recording, press rec button (REC/DEMO button on the remote control). Press 6 PLAY/PAUSE button to resume recording. Recording from a CD 1 Insert a blank cassette tape into the tape deck. 2 Press CD button to CD. 3 Insert a CD and select the first track you want to record. 4 Press rec button (REC/DEMO button on the remote control) to set the unit into recording standby mode. “REC “ and the icon “REC.” appears on the display. 5 Press 6 PLAY/PAUSE button to begin recording. The icon “REC.” and the icon“SYNC” will appear on the display. The track you have selected in the step 3 will be played from the beginning. 6 Press rec button (REC/DEMO button on the remote control) to interrupt or edit recording. Press 6 PLAY/PAUSE button to resume recording. 7 Press 7 STOP button to end recording. Notes: • During recording , it is not possible to listen to another source. •You can program tracks and record onto a cassette tape. If you wish to record only one track, program that track first, and then record it. (See page 9) 13 EN Clock/timer operation View clock The clock (if it is set) will be shown in standby mode. To view the clock in any source mode (CD, TUNER or TAPE), press timer set button (TIMER SET button on the remote control). The clock will be displayed. If the clock has not been set, "0:00" will start flashing. Clock setting Before carrying out the clock setting, ensure that the system is in standby mode. 1 Press program button (PROGRAM button on the remote control) to enter the hour setting mode. The hour indication will start flashing. 2 Press 4 or . button (4 or . SEARCH/ TUNING button on the remote control) to set the hours. 3 Press program button (PROGRAM button on the remote control) to enter the minute setting mode. The minute indication will start flashing. 4 Press 4 or . button (4 or . SEARCH/ TUNING button on the remote control) to set the minutes. 5 Press program button (PROGRAM button on the remote control) to store the setting. The clock will start working. To exit without storing the setting, turn on the system. Notes: •The clock setting will be erased when the power cord is disconnected or a power failure occurred. •The clock can be set in either 12 or 24-hour mode. To change the mode : When the system is in standby mode, press TUNER/band button while pressing 6 PLAY/PAUSE button. Timer setting The system can switch on to CD, TUNER or TAPE mode automatically at a preset time, serving as an alarm to wake you up. The timer recording of radio programs onto a cassette tape is also possible. Important! Before setting the timer, ensure that the clock is set correctly. When setting the timer (playback or recording) for TUNER, be sure to select the station you wish to tune in beforehand. 1 Press timer set button (TIMER SET button on the remote control) to TIMER setting mode. The icon “TIMER ON” will start flashing on the display. 2 Press program button (PROGRAM button on the remote control). The hour indication will start flashing. 3 Set the time to start playback. Press 4 or . button (4 or . SEARCH/ TUNING button on the remote control) to set timer start hours and press program button (PROGRAM button on the remote control) to store the setting. Repeat the same procedure to set the minutes. 4 Press timer set button (TIMER SET button on the remote control). The icon “TIMER OFF” will start flashing. 5 Repeat the step 2 and 3 to set the time to stop the timer (off time). 6 Press timer set button (TIMER SET butt...