Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
NOTES : • Some portable devices are not compatible with this system. • When various cards are connected to the Memory Card Reader, the first detected card is recognized. • Do not extract the USB device in operating. • A back up demands to prevent a data damage. • If you use a USB extension cable or USB hub, the USB device might not be recognized. • A device using NTFS file system is not supported (Only the FAT (16/32) file system is supported.). • The USB function of this unit does not support all USB devices. • Digital camera and mobile phones are not supported. • The player supports at most 99 folders. • This player is not supported when the total number of files is 1000 or more. • USB port of the unit can not be connected to PC. The unit can not be used as a storage device. USB direct Recording Record FM, AM, TAPE or PORTABLE source to USB Connect USB to the player before recording. 1. Select a mode (FM, AM, TAPE or PORTABLE) in which you want to record: Start playing the source you want to record. 2. Start the Recording: 3. To stop a Recording: ON PLAYER ON REMOTE TUNER, TAPE or PORTABLE R (USB Rec.) xx FUNCTION or INPUT REC xx Record CD source to USB You can record one desired track or all of the music tracks in CD to USB. ON PLAYER ON REMOTE 1. Select the CD function: CD FUNCTION 2. Select the track: ./ > .bb/ BB> 3. Start the Recording: R (USB Rec.) REC 4. To stop a Recording: x xx x xx NOTES : • Remove USB while recording, the recorded file may not be saved. • Press R (USB Rec.) on the player or REC on the remote control for longer than 3 seconds, you can select bit rate. Press ./ > on the player or .bb/ BB> on the remote control select the bit rate and R (USB Rec.) or REC again to select the recording speed . Press ./> or .bb/ BB> to select a desired recording speed and R (USB Rec.) or REC again to finish recording. X 1 SPEED -You can listen to music while recording it. X 2 SPEED (Only 96kbps, 128kbps) - You can just recording the music file. (Only Audio CD) • When you select CD function, and then press R (USB Rec.) on the player or REC on the remote control as not selecting any tracks, all music files in CD are recorded. • Set programs by using PROGRAM/MEMO and press R (USB Rec.) on the player or REC on the remote control, you can record desired songs on CD in order. • When set sleep mode to on, recording stops at the previously set time and then the player is turned off. • For the file recorded in USB, up to 16 characters can be entered in setting file names (include a space). Tape Recording Record from a CD, USB, PORTABLE or radio to cassette Wind the tape to the point recording starts. 1. Open the TAPE door: Insert a blank tape. 2. Close the TAPE door: 3. Select a mode in which you want to record: Start playing the source you want to record. 4. Start the Recording: 5. To stop a Recording: ON PLAYER xx Z CD, TUNER, USB or PORTABLE zz and BB xx Z CD to Tape Synchronized Recording The CD synchro recording function dubs a complete CD and programmed titles automatically into a cassette. ON PLAYER 1. Open the TAPE door: Insert a blank tape. x xx Z 2. Close the TAPE door: 3. Select the CD function: CD 4. Start the Recording: The synchronized recording is started automatically after about 7 seconds. z zz and B BB 5. To stop a Recording: x xx Z > x xx Setting the Clock 1. Press for at least 2 seconds: 2. Choose from either: AM 12:00 (for an am and pm display) or 0:00 (for a 24 hour display). 3. Confirm your selection: 4. Select the hours: 5. Press: 6. Select the minutes: 7. Press: ON PLAYER CLOCK ./ > SET ./ > SET ./ > SET Use your player as an alarm Press and hold TIMER on the player for two seconds. Each function, TUNER, CD, USB flashes for two seconds. Press SET on the player when the function you want to be woken by is showing. If you TUNER you will be shown the stations you have saved as presets. Use ./ > on the player to select the station you want, then press SET on the player. You will be shown the ON TIME display. This is where you set the time you want the alarm Use ./ > on the player to change the hours and minutes and SET on the player to save. You will then be shown the OFF TIME display. This is where you set the time you want the function to stop. Use ./ > on the player to change the hours and minutes and press SET on the player to save. Next you will be shown the volume (VOL) you want to be woken by. Use . / > on the player to change the volume and SET on the player to save. Switch the system off. The clock icon shows that the alarm is set. When the system is turned you can check the time the alarm is set for by pressing TIMER on the player. You can also turn the alarm on and off by pressing TIMER on the player. To set the alarm to go off at a different time, switch the system on and reprogramme following the same steps as initially. NOTES : • It is recommended to put a disc on the first tray when you select the CD on timer setting. • When you set the timer on CD/USB mode as CD/USB is not...
Эта инструкция также подходит к моделям:Музыкальные центры - MCD-U23 (156.67 kb)
Музыкальные центры - MCD-U23X (156.67 kb)