Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
ii 4 Move to the third level ii 5 Enter a new password numerical buttons (0-9) and ENTER 6 Recheck the entered new password numerical buttons (0-9) and ENTER 7 Select a code for a geographic area After select, Rating and Password will be UU uu II and activated. (page 17) ENTER 8To confirm what you press Make sure to finish setting the Area Code before leaving the setup menu if you cannot set the rating and Password ENTER ON REMOTE When you use this unit for the first time, you have to set the Area Code as shown below. Adjusting the general ON REMOTE 1 Display setup menu SETUP 2Select a desired option on the first level UU uu 3 Move to the second level ii 4 Select a desired option on the second level UU uu 5 Move to the third level ii 6 Change the setting UU uu, ENTER OSD Initial language During the first use of this unit, the initial appears on your TV screen. You must complete initial language selection before using the unit. English will language. Adjusting the general settings - more you can do Adjusting the language settings Menu Language – Select a language for the Setup menu and on-screen display. Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/ Disc Subtitle/ Disc Menu. [Original] : Refers to the original language in which the disc was recorded. [Other] : To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 17). If you make a mistake before pressing ENTER, press CLEAR. [Off] (for Disc Subtitle) : Turn off Subtitle. HT304SU-AM_DUKRLL_3/25/09 9:25 AM Page 9 Adjusting the display settings TV Aspect – Select which screen aspect to use based TV screen. [4:3] : Select when a standard 4:3 TV is connected. [16:9] : Select when a 16:9 wide TV is connected. Display Mode – If you selected 4:3, you’ll need to define how you wide screen programs and films to be displayed on TV screen. [Letterbox] : This displays a wide screen picture with black bands at and bottom of the screen. [Panscan] : This fills the entire 4:3 screen, cropping the picture as necessary. TV Output Select – Select an option according to the TV connection type. [RGB] : When your TV is connected with the SCART jack. [YPbPr] : When your TV is connected with the COMPONENT/ PROGRESSIVE SCAN jacks on the unit. - If you change TV Output Select to RGB from YPbPr on the setup menu especially when connecting the unit in the way of component video connection, the screen turns black. In that case, connect the video cable to MONITOR jack and select YPbPr on the setup menu again. Adjusting the audio settings DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync - Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use U UUu uu (on the remote control) to scroll up and down through the delay amount, which you can set at anything between 0 and 300m sec. Semi Karaoke – When a chapter/ title/ track is fully finished, this function shows the score in the screen with a fanfare sound. Available discs for the Semi Karaoke function: DVD discs/ DVD Karaoke Discs [On] : When you finished singing a score will appear on the screen. [Off] : Fanfare and score do not appears on the screen. - This function operate on the DVD/CD mode. - The Semi Karaoke function is available only when a microphone is connected. - In case that a fanfare or score appears when a chapter of a movie file is changed during playback, set the Semi Karaoke to “Off” at the setup menu or disconnect the microphone. 5.1 Speaker Setup ON REMOTE 1 Open the settings menu SETUP 2 Select to the audio icon UU uu 3 Select right to enter the audio menu, then select 5.1 Speaker Setup ii UU uu ENTER 4 Select the speaker you want to adjust II ii 5 Select a option and change the settings UU uu II ii 6 Set the output level (volume) of a speaker from -5dB to +5dB. The speaker size setting are fixed, so you cannot change the setting. II ii 7 If you connect speakers to your unit, setting the Distance lets the speakers to know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. II ii 8Test the signals of each speaker Adjust the volume to your taste according to these signals. II ii 9 Save your settings and exit the Setup menu RETURN HT304SU-AM_DUKRLL_3/25/09 9:25 AM Page 10 Adjusting the lock settings To access the lock options, you must enter yet entered a password you are prompted then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then co...