|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
6 Result: The first track selected is played. CD TUNER BAND MO/ST TIMER/CLOCK TIMER ON/OFF AUX PROGRAM/SET REP. A B SLEEP EQ/S.BASS SRS WOW CD SYNC. DISPLAY TUNING REPEAT TUNING MODE VOLUME PTYRDS +10 6 2,3,5 14 4 CD TUNER BAND MO/ST TIMER/CLOCK TIMER ON/OFF AUX PROGRAM/SET REP. A B SLEEP EQ/S.BASS SRS WOW CD SYNC. DISPLAY TUNING REPEAT TUNING MODE VOLUME PTYRDS 3,5 7 1, 9 4,8 4,8 13 Searching for and Storing the Radio Stations Selecting a Stored Station GB You can store up to: You can listen to a stored radio station as follows: 15 FM stations 8 MW stations 7 LW stations 1 Switch the system on by pressing ( ). Select the required frequency band by pressing TUNER/BAND 2 again on the front panel or BAND on the remote control. Result: The appropriate indication is displayed: FM AM(MW) LW Frequency Modulation Medium Wave Long Wave 3 To search for a station... Press TUNING MODE Manually One or more times until MANUAL is displayed. Automatically One or more times until AUTO is displayed. PRESET function is explained in detail in the section “Selecting a Stored Station” on. Select the station to be stored by: 4 Pressing or buttons on the front panel or or buttons on the remote control to increase or decrease the frequency respectively. To scroll through the frequencies faster when searching manually, hold down the or buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. If you do not want to store the radio station found, revert to Step 4 5 and search for another station. Otherwise: a Press PROGRAM/SET. Result: The PROG is displayed for a few seconds. b Pressing or buttons on the front panel or or buttons on the remote control to assign a program number between 1 and 15. c Press PROGRAM/SET to store the radio station. Result: PROG is no longer displayed and the station is stored. 6 To store any other radio frequencies required, repeat Steps 3 to 5. The PROGRAM function can be used to assign a new station to an existing program number. Switch the system on by pressing ( ) . 1 Select the required frequency band by pressing TUNER/BAND on 2 the front panel. Select the radio station as follows. 3 To listen to ... Press ... Stored station 1. the TUNING MODE button until “PRESET” is displayed. 2. or button to select the required program. DEMO/ DIMMER REV.MODE CD SYNC. TUNER TAPE TUNING MODE /DOWN UP/ CD AUX Band STOP 1 3 2 Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press MONO/ST. to switch from stereo mode to mono. The quality of the sound will be improved. 14 CD TUNER BAND MO/ST TIMER/CLOCK TIMER ON/OFF AUX PROGRAM/SET REP. A B SLEEP EQ/S.BASS SRS WOW CD SYNC. DISPLAY TUNING REPEAT TUNING MODE VOLUME PTYRDS +10 2 5 DEMO/ DIMMER REV.MODE CD SYNC. TUNER TAPE TUNING MODE /DOWN UP/ CD AUX Band SRS WOW OPEN/CLOSE STOP 54 2 . 3 54 54 54 3 About RDS broadcasting About RDS DISPLAY function About RDS DISPLAY function This unit has the RDS (Radio Data System) function, which enables for About "PS NAME" MODE the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc.) to be received Displays the name of broadcasting station. from the FM RDS station together with normal radio signal. GB Press the RDS DISPLAY button to select the PS NAME. "PS NAME" appears on the display. If the PS information is being received, the PS name (BBC, AFO, NDR, etc.) is shown on the display. If the PS information isn't received, the original FM frequency is shown. Even though no RDS DISPLAY button is pressed, the reception of PS information ensues the PS name is displayed. About 'RT' MODE Displays the character transmitted from the broadcasting station. Press the RDS DISPLAY button to select the RT MODE. "RT" appears on the display. If the RT information is being received, the received information is shown on the display. If the RT information isn't received, the "NO RT" is shown. On the display. About CT(Clock Time) Sets the time of RDS clock. To select the CT time, set the RDS DISPLAY button to CT MODE. CD TUNER BAND MO/ST TIMER/CLOCK TIMER ON/OFF AUX PROGRAM/SET REP. A B SLEEP EQ/S.BASS SRS WOW CD SYNC. DISPLAY TUNING TUNING VOLUME PTYRDS MUTE1 3 The CT information will take up to 2 minutes to be decoded therefore the clock isn’t displayed immediately. If there is no received CT information, "NO CT" is displayed. 1 Press the ( ) button. Receive the FM radio. 2 See the radio receiving method on the page 14. FM and frequency are shown on the display If the received station transfers the RDS information, 'RDS' appears automatically on the display. 3 Press the RDS Display button to select the desired RDS mode. Whenever the button is pressed, RDS mode changes as follows. PS NAME RT CT Current FM frequency The RDS function is available only in FM broadcasting. Description on R...