Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
When the PTY MODE is selected(The PTY MODE is shown on the display), press the PTY KEY once again to convert into PTY-SEARCH MODE and auto-search the station sequentially. If the PTY MODE received in the course of auto-search agrees with the selected PTY MODE, the auto-search stops and the PTY-SEARCH is finished. If the PTY MODE which agrees with the PTY MODE selected in the course of auto-search, isn't received, it is returned to the first frequency at beginning the PTY SEARCH and the auto-search and PTY SEARCH are suspended. REV. ModeCD SYNC. Display CD Repeat VOL. Band +10 Tuning Mode Program/ Set PTY RDS 2 22 16 Selecting the Cassette Playback ModeListening to a Cassette Listening to a Cassette GB Your micro component system has three cassette playback Always treat your cassettes with care; refer, if necessary, to the modes which enable you to listen to both sides of a cassette section entitled “Precautions When Using Audio Cassettes” on automatically. page 23. Press REV.Mode until the appropriate symbol is displayed. 1 Switch the system on by pressing Standby/On ( ). When the display indicates... The micro component system plays 2 Open the cassette deck by pushing on the corner of the cover marked back... Push Eject ) until you hear a click and then releasing it. Close the deck by pushing on it until it clicks into place. Press ... Tape ( Tape ( Result: The cassette starts playing. on the front panel or , ( One side of the selected cassette and then stops. 3 One side of the cassette.4 To listen to... The other side of the cassette and then Side A ) button once. stops. Side B ) button twice. Both sides of the cassette indefinitely until you press stop. Press the , on the remote con 5 trol button if necessary. To... Press ... Rewind the cassette (or ) button. Fast-forward the cassette ) button. (or When you have finished playback, press button. 6 REV. ModeCD SYNC. Display CD Repeat +10 TAPE PTY RDS TUNER Band Op Phones 1 4 Standby/On CD AUX Down Rec/Pause 5 Volume Tuning Mode REV.Mode 6 5 Up Sound Mode D 17 GB You can record a radio program of your choice. You do not need to adjust the volume, as it has no effect on the recording. Switch the system on by pressing Standby/On ( ) . Insert a blank cassette in Deck. Select the TUNER function by pressing TUNER(Band). Select the radio station that you wish to record by pressing or button . Press REC/Pause. Result: REC is displayed in red and recording starts. To stop recording, press button. 1 2 3 4 5 6 The direct recording mode enables you to start recording with any track on the compact disc. You do not need to adjust the volume, as it has no effect on the recording. Switch your system on by pressing Standby/On ( ) . Insert a blank cassette in Deck. Load a compact disc. Press the CD( ) button. Use the CD selection ( , ) buttons to select the desired song. Press the REC/Pause button. Result: Recording will begin. To stop recording, press button. Standby/On Phones O CD TAPE AUX TUNER Volume Tuning Mode Down Up Rec/Pause REV.Mode Sound Mode Band 18 Recording a Radio Program Standby/On Phones O CD TAPE AUX TUNER Volume Tuning Mode Down Up Rec/Pause REV.Mode Sound Mode Band 4 1 4 5 6 3 You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. Switch the system on by pressing Standby/On ( ) . Insert a blank cassette in Deck. Load a compact disc. Press the CD( ) button. Use the CD selection ( , ) buttons to select the desired song. Press the CD Synchro button on the remote control. When stopped, press the button to start the recording from the first piece of music. Press CD Synchro button on the remote control.during the playback of CD to start the recording from the first part of the music being played. To stop recording, press button. Synchronised recording 1234 5 6 1234 5 6 Direct recording Recording a Compact Disc 1 5 6 Standby/On Phones O CD TAPE AUX TUNER Volume Tuning Mode Down Up Rec/Pause REV.Mode Sound Mode Band 1 4 4 6 4 4 REV. CD SYNC. Mode Display CD Repeat +10 TAPE PTY RDS 5 Timer Function GB The timer enables you to switch the system on or off at specific times. 9 Press Stanby/On ( ) to set the system to standby mode. Result: is displayed to the bottom left of the time, indicating that Example: You wish to wake up to music every morning. the timer has been set. The system will switch on and off automatically at the required times. If you no longer want the system to be switched on or off automatically, you must cancel the timer. If the timer switch on and off times are identical, the word ERROR is displayed. Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 Switch the system on by pressing Standby/On ( ) . 2 Press Timer/Clock until TIMER is displayed. 3 Pr...