Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Push the tab back: To the left on the system, until it clicks into place To the top on the loudspeaker Result: The wire is pinched and held firmly in place. Repeat the operation for each wire. 1 23 4 Connect the CENTER SPEAKER. Connect the center speaker cord to the CENTER SPEAKER terminal. Connect the SURROUND SPEAKERS. There is no difference between the surround speakers. Both speakers can be connected as R (right) or L (left). Connect the surround speaker cords to the SURROUND SPEAKERS terminals. Connecting the Center Speaker/ Surround Speaker CENTER SPEAKER SURROUND SPEAKER (right) SURROUND SPEAKER (left) Connection of the subwoofer (optional) The subwoofer generates low-pitched tones. (Ex. Explosion, the sound of spacecraft flying, the sound of pondering, etc.) Connect the subwoofer Connect the subwoofer cord to the SUBWOOFER IN and SUB WOOFER PRE OUT terminal. Plug the AC Cord on the rear of the SUBWOOFER into an appropriate socket. GB 9 Press the Power button. Result : LED indicator turns on red lamp. Using the Volume knob, control the low tone. If you pay emphasis to low tone, magnificent atmosphere can be created. 1 2 The following show examples of connections commonly used to connect the DVD player with a External Source. (Example : TV, VCR, DAT CD-RW, etc) • When S-VIDEO is connected, S-VIDEO has priority. Connection of the TV monitor (optional) and VCR (optional) FRONT SPEAKERS (6.) LINE OUT DIGITAL OUT OPTICAL AUX IN AM ANT. FM 75‰ L R SURROUND SPEAKER (6‰) CENTER SPEAKER (6‰) VIDEO OUT SUB WOOFER PRE OUT S-VIDEO OUT TV monitor LINE IN VCR Audio cord Audio cord LINE OUT LINE IN S-Video Composite video (Supplied) LINE OUT VIDEO OUT S-VIDEO OUT (MAX-DN87 ONLY) FRONT SPEAKERS (6.) LINE OUT DIGITAL OUT OPTICAL AUX IN AM ANT. FM 75. L R SURROUND SPEAKER (6.) CENTER SPEAKER (6.) VIDEO OUT SUB WOOFER PRE OUT S-VIDEO OUT SUB WOOFER PRE OUT Power Volume Min Max PS W100E ACTIVE SUBWOOFER SYSTEM 1 2 SUBWOOFER IN (PS W100E ONLY) PS W100E GB 10 Connection of the MD recorder (optional) FRONT SPEAKERS (6.) LINE OUT DIGITAL OUT OPTICAL AUX IN AM ANT. FM 75. L R SURROUND SPEAKER (6.) CENTER SPEAKER (6.) VIDEO OUT SUB WOOFER PRE OUT S-VIDEO OUT PLAY OUT RECORD IN OPTICAL RECORD IN AUX IN LINE OUT DIGITAL OUT OPTICAL MD recorder This unit can output DVD/CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment. (DAT deck, MD recorder, etc.). Remove the dust cap (1) from the DVD/CD DIGITAL OUT jack. Then, connect an optical cable plug to the DVD/CD DIGITAL OUT jack. When the DVD/CD DIGITAL OUT jack is not being used Attach the supplied dust cap. DVD/CD Digital Out Jack If the TV input is the Scart Jack type, please connect it as shown below. Connection of the Scart Jack (optional) FRONT SPEAKERS (6.) LINE OUT DIGITAL OUT OPTICAL AUX IN AM ANT. FM 75. L R SURROUND SPEAKER (6.) CENTER SPEAKER (6.) VIDEO OUT SUB WOOFER PRE OUT S-VIDEO OUT TV monitor Scart Input Jack Scart Jack Composite video (Supplied) Audio Cord VIDEO INPUT AUDIO INPUT LINE OUT VIDEO OUT How to connect a COAXIAL TYPE aerial. Connect a 75. antenna to the FM antenna terminal. Plug the connector on the FM aerial supplied into the coaxial socket (75.) marked FM on the rear of the system. Follow the instructions given on Page 24 to tune into a radio station, and determine the best position for the aerial. If reception is poor, you may need to install an outdoor aerial. To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75. coaxial cable (not supplied). Connecting the FM Aerial GB 11 The AM aerial (for long and medium waves) can be: Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM . To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. Connecting the AM (MW) Aerial FRONT SPEAKERS (6‰) AUX IN Setting the Clock Viewing the Various Functions on Your System GB ou can view the various functions available on your system. The various functions available are listed in turn on the dis- For instructions on how to use them, refer to the appropriate Timer/ Clock BandR TUNER DVD/CDPTY RDS Display If the temperature of the set is too higher, the Volume will be adjust till VOL. 20 automatically. On/Standby Demo Timer/ Clock Mono/ST. Display Counter Reset Down Deck 1/2 CD Synchro REC/Pause Record Lock Dubbing Normal High Tuning Mode Up BandR TUNER DVD/CD TAPE AUX Memory REV.Mode Multi Jog Enter Phones PTY RDS Display1 2 4,6 3,5,7 Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock: When you first purchase the mini-compact system After a power failure After unplugging the unit For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. Switch the system on b...
Эта инструкция также подходит к моделям:Музыкальные центры - MAX-DN83 (4.12 mb)
Музыкальные центры - MAX-DN87 (4.12 mb)
Музыкальные центры - MM-DN85 (4.12 mb)
Музыкальные центры - MM-DN87 (4.12 mb)