Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control unit a shorter distance from the system. To prevent damage • Never place heavy items on top of the unit. • Do not disassemble or reconstruct the unit. • Do not spill water or other liquids into the unit. RQT6530 RQT6530 6 Before use Connections • Plug the AC power supply cord into a household AC outlet only after all other connections have been made. • To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off. 1 Connect the FM indoor antenna. Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference. Note For the best reception: An FM outdoor antenna is recommended. (\ page 7) 2 Connect the AM loop antenna. Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords. 3 Connect the speaker cords. A Confirm the colors of the tags on the ends of the cords. B For White tags: Connect cords to gray terminals. For Blue, Black and Red tags: Connect cords so tag colors match the terminal colors. Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency. Incorrect connection can damage the unit. Caution Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. 4 Connect the AC power supply cord. Note The included AC power supply cord is for use with this Red ( unit only. Do not use it with other equipment. .) Black (·) Black (·) Red (.) 1 2 3 AM loop antenna Adhesive tape FM indoor antenna 1 2 R L LOW(6 ) HIGH(6 ) Blue (–) Red (+) Gray (+) White Blue Black Red A B Black (–) (R) (L) 12 3 4 1 3 2 Caution • Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. • Do not attach these speakers to walls or ceilings. Connections Optional antenna connections You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc. A B C AUX (L) (R) AM outdoor antenna (not included) AM loop antenna (included) Shield braid Core wire FM outdoor antenna (not included) 5-12 m Analog player (not included) "LINE OUT" position Rear panel of this unit LR 1 2 (1 3/16") (19/32") FM outdoor antennaA Disconnect the FM indoor antenna if an FM outdoor antenna is installed. Note An outdoor antenna should be installed by a qualified technician only. Before use AM outdoor antennaB Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location. Note When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during an electrical storm. External unit connections • Make sure that the power supply for all components has been turned off before making any connections. • For details, refer to the operating instructions of the unit which is to be connected. • All peripheral components and cables sold separately. Connecting analog equipmentC This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch. When units other than those described are to be connected, please consult your audio dealer. Note • Only an analog player with a built-in phono equalizer can be connected. • Set the switch to the “LINE OUT” position at the back of the analog player. 7 RQT6530 Front panel controls Main unit Before use CD CHECK OPEN/CLOSE CD CHANGE PHONES AC IN PRESET EQ 4/REW/g 3/FF/f L/–DEMO [REC/J SUPER SOUND EQ AUX CD 1 CD 2 CD 3 CD 4 CD 5 TUNER/ BAND TAPE . DOWN VOLUME UP CD -/ J POWER f/ 7 OPEN PRESET EQ 4/REW/g 3/FF/f L/–DEMO [REC/J AUX CD 1 CD 2 CD 3 CD 4 CD 5 TUNER/ BAND TAPE . CD -/ J SUPER SOUND EQ 1 11111 Cassette lid 2 22222 Cassette open button (c OPEN) ........................... 19 3 33333 Tape indicator This indicator changes in the following manner: a Orange (when no cassette is inserted.) b Green (when cassette is inserted.) c Red (when in recording mode.) 4 44444 AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC mains supply. 5 55555 Standby/on switch ( POWER) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 6 66666 CD check button (CD CHECK) ............................... 13 7 77777 CD trays 8 88888 Display 9 99999 Remote control signal sensor ! !!!!! Volume control (VOLUME DOWN, UP) ..... 10, 12, 19 " """"" CD tray open/close button (c OPEN/CLOSE) ...... 12 # ##### CD change button (c CD CHANGE) ......................