Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off. Notes on speaker use • You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. • Reduce the volume in the following cases to avoid damage. – When playing distorted sound. – When the speakers emit strange noise (howling) from a record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument. – When adjusting the sound quality. – When turning the unit on or off. If irregular coloring occurs on your television These speakers are designed to be used close to a television, but the picture may be affected with some televisions and set-up combinations. If this occurs, turn the television off for about 30 minutes. The television’s demagnetizing function should correct the problem. If it persists, move the speakers further away from the television. Note • Never short-circuit positive (+) and negative (–) speaker wires. • Be sure to connect only positive (copper) wires to positive (+) terminals and negative (silver) wires to negative (–) terminals. Incorrect connection can damage the speakers. AM ANT FM ANT OPTICAL OUT S-VIDEO HAUT-PARLEURS OUT VIDEO OUT AC IN SUBWOOFER OUTR L AUX HIGH(6.) SPEAKERS (SB-PM39) LOW(6.) R L Connect the left (L) side in the same way. Connect cords so tag colors match the terminal colors. White Red Black Blue Copper(Red tag) Silver(Black tag)Silver(Blue tag) Copper(White tag) Right speaker 3 SPEAKERS(SB-PM39)HIGH(6.) LOW(6.) 1 2 R L EXT LOOP 75. COMPONENT VIDEO OUT PR PB Y RQT7509 STEP3 Television 7 77777Connecting a television with a VIDEO IN terminal Television (not included) Video cable (included) AM ANT FM ANT OPTICAL OUT S-VIDEO HAUT-PARLEURS OUT AC IN SUBWOOFER OUT R L AUX HIGH(6.) SPEAKERS (SB-PM39) LOW(6.) R L COMPONENT VIDEO OUT PR PB Y EXT LOOP 75. VIDEO OUT terminal Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard. 7 77777Connecting a television with an S-VIDEO IN terminal FM ANT OPTICAL OUT S-VIDEO OUT VIDEO OUT AC IN SUBWOOFER OUT R L AUX S-VIDEOIN S-VIDEO cable (not included) AM ANT HAUT-PARLEURS HIGH(6.) SPEAKERS (SB-PM39) LOW(6. ) R L COMPONENT VIDEO OUT PR B EXT LOOP 75. S-VIDEO OUT terminal The S-VIDEO terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y) signals. (Actual results depend on the television.) Video cable 7 77777Connecting a television with COMPONENT VIDEO IN terminals FM ANT OPTICAL OUT S-VIDEO OUT VIDEO OUT AC IN SUBWOOFER OUT R L AUX AM ANT HAUT-PARLEURS HIGH(6.) SPEAKERS (SB-PM39) LOW(6. ) R L COMPONENTVIDEO IN Y PB PR COMPONENT VIDEO OUT PR PB Y EXT LOOP 75. Video cables (not included) COMPONENT VIDEO OUT terminals These terminals can be used for either interlace or progressive output and provide a purer picture than the S-VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR,Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color. • After making this connection, change the black level for a better picture (A page 29, “Video” tab - Black Level Control). To enjoy progressive video 1. Connect to the component video input terminals on a 480P compatible television. (Video will not be displayed correctly if connected to an incompatible television.) 2. In QUICK SETUP, set “Progressive Out” to “Enable”. 3. Change “Progressive” to “480P” (A page 20, Picture Menu— Video Output Mode). • All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television. • If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT, output will be interlace, irrespective of the settings. Simple setup RQT7509 The remote controlSTEP5 FM ANT OPTICAL OUT S-VIDEO OUT VIDEO OUT AC IN SUBWOOFER OUTR AUX HAUT-PARLEURS HIGH(6.) SPEAKERS (SB-PM39) LOW(6. ) 2 1 Click! Adhesive tape To household AC outlet (AC 120V, 60 Hz) AM ANT EXT LOOP 75. EXT LOOP AM ANTCOMPONENT VIDEO OUT PR PB Y Fix the other end of the antenna where reception is best. STEP5 FM ANT OPTICAL OUT S-VIDEO OUT VIDEO OUT AC IN SUBWOOFER OUTR AUX HAUT-PARLEURS HIGH(6.) SPEAKERS (SB-PM39) LOW(6. ) 2 1 Click! Adhesive tape To household AC outlet (AC 120V, 60 Hz) AM ANT EXT LOOP 75. EXT LOOP AM ANTCOMPONENT VIDEO OUT PR PB Y Fix the other end of the antenna where reception is best. STEP4 Connecting the antennas and AC power supply cord Connect the AC power supply after all other connections are complete. AM loop antenna FM indoor antenna AC power supply cord Conserving power The unit consumes power (approx. 0.5 W) even when it is tur...