Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Carefully remove the 4 white foam protection corners. • Turn the brown box on its side so you can pull out the white internal cardboard box. • Carefully slide the white box out and stand it flat with the arrows on the side pointing up. • Open the box first by opening the end flaps then the front. • Remove the white foam layer to access the wooden box, set it aside. Accessories Foam Block • Remove the power supply, power cord and DC cord, put it aside. • Remove the aluminium top cover and the Brilliance cleaner. • Remove the remote control and install the batteries. • Remove the magnetic disc clamp. • Remove the suspension covers and put them to one side for later installation. • The suspension covers will be installed following the suspension fine tuning should this be required. • Remove the wooden top cover using your Phillips screwdriver. • Grasp the plastic protective bag at each end using the handles and lift the whole Oracle player unit out of the box. • Open the plastic bag at one end only and remove the foam protective end cap. • Hold the plinth and slide the CD turntable assembly out of the bag. • Remove the “C” shape, hold down spacer block. • Remove the inner protective bag. Note: Place the inner bag, the 2 protective end caps and the “C” shape hold down spacer blocks back in the wooden box thus making sure they do not get lost. Put the wooden top cover back up. Note: When repackaging, it is important to use this inner protective bag to prevent surface damage to the clear lacquer finish. SUSPENSION FINE TUNING Caution! Do not attempt to lift the main chassis from the suspension towers as this could damage the connecting cable between the display module and the main chassis. If the main chassis needs to be removed, a special technical document is available from Oracle Audio Technologies or your local area distributor. This work should always be carried out by an experienced and competent technician. • Place your Oracle CD player on a flat surface to complete the set up procedure. Suspension fin Tuning The suspension of your Oracle CD turntable has been calibrated at the factory but it possibly might require minor fine-tuning before putting the player into service. To help with this we have supplied a suspension calibration tool to assist with accurate measurement and calibration of each suspension tower. Note: Before beginning this step, very carefully seat the aluminium top cover above the compact disc in its specially machined recess and position, so that the two finger slots match the one on the player main chassis. The slightly curved section of the finger slots should be facing the front of the unit. This will give a more accurate operational mass of the m...
Эта инструкция также подходит к моделям:Музыкальные центры - 2000 Transport (1.24 mb)
Музыкальные центры - 2500 MK II (1.24 mb)