Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
When done press stop. 10. Upon completion, press the TRACK button to enter the Vtr1-8 (Vtr1-6 on the D12) screen. 11. Using the cursor button highlight 1a then using the value wheel, select virtual track 1h. Do the same for track 2a (set to 2h). 12. Set the pan pots for tracks 1 & 2 left and right respectively, and set the faders to unity (0dB). 13. Repeat steps 1-12 for every song that you wish to put to CD. Now we’re ready to burn tracks 1 and 2 to CD. Set Scene Read to OFF at this point, so that tracks 1 and 2 cannot be manipulated as they were when they were single tracks. If you have not already done so, insert a blank CDR into the drive and allow it to ‘spin up’ completely, then: 1. Press the SONG/CD button until you reach the Song Select screen. Note, the song you select on this screen is the one that will be burned to the CD. 2. Press the SONG/CD button (on the D16 the SONG button) three times to enter the CDR/RW screen. 3. Cursor over to the Write to CD field and press the ENTER button. You will be prompted to “Obey Copyright Rules” 4. Highlight “YES” and press the ENTER button. The song will now be converted into an image file and then copied to the CD 5. Repeat steps 1-3 for each song you wish to burn to CD. 6. Highlight the “Final” field and press the Enter button when you’re done burning the last song to the CD. This will finalize the CD, and make the information audible in a standard CD player!...
Эта инструкция также подходит к моделям:Музыкальные центры - D1600(MKII) (56.35 kb)