Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
CONTROL AND FUNCTIONS . SPECIFICATIONS . OPERATIONS USER MANUAL L-80 USB SAFETY INSTRUCTIONS 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all Instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near nay heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized plug. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Serving is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The mains plug is used as the disconnect device, the disconnect device shall be readily operable. WARNING To reduce the risk of the fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. CAUTION To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. SPECIFICATIONS TURNTABLE Type 2-speed full manual Motor DC motor Driving method Belt drive Turntable platter 330mm dia. Aluminum diecast Speeds 33 1/3 and 45 rpm USB function USB REC. Function (only for MP3 format 192 kbps) Wow en flutter Less than 0.2% WRMS (JIS WTD) with 33 1/3rpm S/N ratio More than 55dB (DIN-B) Pitch controls +/- 10% Starting Time Less than 1 sec with 33 1/3 Braking Time Less than 1 sec with 33 1/3 Time for Speed Change Less than 1 sec. from 33 1/3 to 45 rpm Less than 1 sec. from 45 to 33 1/3 rpm TONEARM Type Static balanced S-shaped tonearm with detachable headshell Effective Arm Length 230.5mm Phono Output Level 1.5~3.6mV at 1KHz 5cm/sec (HP-4005) Line Output Level 90~216mV aan 1KHz 5cm/sec (HP-4005) Frequency Response 20Hz-20KHz Channel Separation More than 15dB Channel Balance Within 2.5dB at 1KHz GENERAL Power Supply AC115/230V, 60/50Hz Power Consumption 9 Watt Dimensions 449 (W) x 370 (D) x 145 (H) mm Weight 3.8 Kg NOTE: Specifications and design subject to possible modification without notice, due to improvements. CONTROL AND FUNCTIONS 1. USB SOCKET USB record only for MP3 format. 2. PLATTER 3. START/STOP BUTTONP Press this button to start or stop the platter. 4. PHONO/LINE SWITCH Switches the output to either Phono or Line level. 5. PLATTER SPEEDS Used to select the desired speed. * Press the “33” button to select the 33rpm speed. * Press the “45” button to select the 45rpm speed. 6. RECORD/STOP BUTTON Press the button to start recording and press again to stop recording. 7. HEADSHELL LOCKING NUT Attach the headshell by inserting into the front end of the tone arm, then turn the locking nut clockwise. 8. PITCH SLIDER Use this to change the speed of the platter. When you move the PITCH SLIDER, the PITCH indicator won’t light; just when the PITCH SLIDER at 0%, the PITCH indicator will light. 9. S-SHAPED TONEARM 10. TONEARM CLAMP AND REST Use this rest for the tone arm and clamp it in position during transportation. 11. MOTOR OFF/Reverse BUTTON Tap the button to switch Reverse/Forward playback. Press the button more than 1sec. to enable motor off, and the led will be flash. Press the button more than 1sec again to disable motor off. 12. 45 RPM AD...