Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
LEFT/RIGHT BALANCE CONTROL (PULL) Pull the volume knob outward until it locks into the outer position. Rotate it to the left or right to obtain the desired balance between left and right speakers. Push the knob back in to return it to the volume control position. FRONT/REAR FADER CONTROLRotate the outer knob to the left or right to obtain the desired balance between front and rear speakers in 4 speaker installations. When used in conjunction withthe Left/Right Balance Control, you have full 4-way stereo balance capability. TONE CONTROL To adjust this Knob for tone balance. TUNER (AM/FM BAND) SELECTORDuring radio play, each time the BND button is pressed, the radio band changes. The indications FM1, FM2 and FM3, AM1, AM2 will appear on the display panelaccording to your selection. During FM operation, when the station is broadcasting in stereo, the stereo icon appears on the display. During AM operation, no indications are displayed. During CD play or AUX mode, pressing this button will change to radio operationwithout ejecting the disc. MANUAL UP/DOWN TUNING, STATION SEEK AND TRACK SELECTIONEach time the Up Tuning side of the button is pressed, the radio will tune one frequency step higher. Similarly, each press of the Down Tuning side of the buttonwill tune one frequency step lower. To manually tune in a station, press the appropriate directional side of the button until the desired frequency is reached. Pressing and holding either side of the button for longer than 2 seconds will cause the radio to continue tuning rapidly in the selected direction until the button is released, at which point it will seek the next available station and stop. During CD play operation, momentarily pressing and releasing either side of thebutton will increase or decrease CD track selection in sequence. Pressing and holding either side of the button for longer than 2 seconds, will will begin fast forwardor reverse play of the current track. Size:210 x 148 10dec02 808002020304001 AUTO-STORE TUNING (AS) PRE-SET SCAN TUNING (PS) Press the A/PS button momentarily to scan the 6 stations in the pre-set memories of the band in use. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station (the channel number on the display panel will flash during Pre-Set Scan operation). Press the button again momentarily to stop Pre-Set Scan operation and remain on the selected station. Pressing the button for longer than 2 seconds will activate the Auto-Store Tuning feature. The radio will automatically scan the band in use and enter strong stations into the pre-set memory positions for that band. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new strong stations. This feature is most useful when traveling in a new area where you are not familiar with the local stations. STATION PRE-SET MEMORIES To set any of the 6 pre-set memory buttons, use the following procedure: 1.Turn the unit on and select the desired band. 2.Select the first station to be pre-set using the Manual Up/Down Seek Tuning functions. 3.Press the pre-set button to be set and continue to hold in until the pre-set number appears in the display panel. The station is now set into the memory of that pre-set button and can be re-called at anytime by momentarily pressing that button. 4.Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit. CD DISC SLOT With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. The CD IN indication and track number will appear on the display panel. TRACK REPEAT PLAY SELECTOR (RPT) During disc play, press this button to repeat the play of the selected track (RPT will appear on the display panel). Play of the track will continue to repeat until the button is pressed again and the RPT indication disappears from the display panel. DISC EJECT Disc play is stopped; the disc is ejected. The unit will then change to radio operation. If the disc is not removed from the unit within 10 seconds of being ejected, it will be automatically re-loaded into the unit to prevent damage to the CD.(CD IN will appear steady on the display panel). TIME/FREQUENCY DISPLAY SELECTOR (T/F) A momentary press of the T/F button will display the time of the incorporated quartz clock. The time display will persist for approximately 5 seconds, after which the frequency display will automatically return, unless the button is pressed again prior to the 5-second time-out. RESET BUTTON A RESET button is located on the front of the chassis. The re-set circuitry is provided to protect the microprocessor circuitry and should only be activated under the following circumstance: If there is a malfunction of and of the switches on the unit or the CD player, pressing the RESET button may clear the system and r...