Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The indicator on the top of the remote control blinks twice while pressing the button. 3 Press the DIGIT buttons in the order of “4,” “O” and “6.” BEFORE OPERATION TAPE MONITOR POWER [ FUNCTION buttons VOLUME PHONES FRONi SPEAKERS A, B To turn the unit on 1 Turn the VOLUME control toward MIN. Otherwise, the speakers may be damaged. 2 Press one of the FUNCTION buttons (TUNER, PHONO, AUX/TV, CD, VIDEO 1, VIDEO 2 or VIDEO 3) or the TAPE MONITOR button. When pressing the TUNER button, the previously tuned station is received (Direct Play Function). The POWER button is also available. Operation is possible after four seconds. To select the front speaker system To use speaker system A: Set the FRONT SPEAKERS A button to sON. To use speaker system B: Set the FRONT SPEAKERS B button to sON. To use both speaker systems : Set both the buttons to ~ ON. Set the button(s) to 10FF to turn off the speaker system(s). m As the front speaker systems A and B are connected in series: -The sound will be slightly decreased when using both speaker systems -No sound can be heard if the FRONT SPEAKERS A and B buttons are set to ~ ON when only one speaker system is connected To change a displayed nalme for the AUX/TV button and VIDEO 2 button When the AUX/TV button is pressed, AUX is displayed initially. It can be changed to TV. With the power on, press the POWER button while pressing the AUX/TV button, The displayed name for VIDEO 2 button can be changed to VIDEO 2, LD or MD; with the power on, press the POWER button while pressing the VIDEO 2 button. Using the headphones Connect headphones to the PHONES jack with a standard stereo plug (06.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS A and B buttons to 10FF. Otherwise sound is output from the speakers. m When using the headphones, set the Dolby Pro Logic and DSP system to off. To turn the unit off Press the POWER button. ENGLISH 6 SUPER T-BASS SYSTEM CUSTOM AUDIO ADJUSTMENT The T-BASS system enhances the realism of low-frequency sound. Press the T-BASS button. MUTl~G V?LUME Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference. BALANCE T-BASS BBE VOLUME CONTROL Turn the VOLUME control on the unit, or press the VOLUME buttons on the remote control. To adjust the Iefth’ight balance Turn the BALANCE control. To mute the sound temporarily Press the MUTING button. “MUTE ON” appears on the display for four seconds. While muting the sound, the selected FUNCTION button flashes. Press the MUTING button again to restore the sound. BBE SYSTEM The BBE system enhances the clarity of high-frequency sound. Press the BBE button. Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference. m The BBE system is automatically canceled when Dolby Pro Logic is turned on. L L 111111 iibdk+mm+= J (cancel) m Low-frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low-frequency sound is originally emphasized. In this case, cancel the T-BASS system. SOUND ADJUSTMENT DURING RECORDING The output volume and tone (except BBE) of the speakers or headphones may be freely varied without affecting the level of the recording. Recording with the BBE The desired source can be recorded with the BBE function to enhance the clarity of high-frequency sound. When playing back a tape recorded with BBE, it is recommended that BBE be set to off. 7 ENGLISH ELECTRONIC GRAPHIC DSP SURROUND EQUALIZER GEQ G;Q This unit provides the following five different equalization modes. ROCK: Powerful sound emphasizing treble and bass POP: More presence in the vocals and midrange JAZZ: Accented lower frequencies for jazz-type music CLASSIC: Enriched sound with heavy bass and fine treble BGM: Calm tone with suppressed bass and treble Press one of the GEQ (Graphic Equalizer) buttons. The selected mode name appears on the display for two seconds, and the selected mode on the right side of the display is enclosed with parentheses, To cancel the selected mode Press the selected button again. “GEQ oFF appears on the display. To select with the remote control Press the GEQ button repeatedly until the desired equalization mode is displayed. MANUAL DSP SELECT II DSP DOWNY uPA MANUAL SELECT The DSP (Digital Signal Processor) surround circuits can recreate the effect of sounds reflected from walls or ceilings, to obtain the sound presence of real environments. There are four modes with matching graphic equalization modes. Equalization modes are selected automatically and can also be selected or turned off to suit your preference. Press one of the DSP buttons (DANCE, LIVE, HALL or ARENA). The selected mode name appears on the display for two seconds. ,-.—, and the selected DSP and matching GEQ modes on the display are enclosed with parentheses. m ~—Selec\ed DSP mode Matching GEQ mode When the music source is monaural Select LIVE to obtain a simulated stereo effect. When DANCE or HALL ...