Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Operation is possible after four seconds. The VOL (volume) level or function name is displayed one after the other for the first four seconds. The selected function indicator lights up in red. To change the brightness level of the display 1 Press the ECO button repeatedly until “DIM MODE” is displayed. 2 Within 4 seconds, press the ENTER button. 3 Within 4 seconds, turn the MULTI JOG to select the dimmer mode as below. The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3. - DIM-OFF: The normal display. DIMMER 1: The illumination of the display is dimmer than usual. DIMMER 2: The illumination of the display is dimmer than DIMMER 1. The function indicator turns off. Using the headphones Connect headphones to the PHONES jack with a standard stereo plug (o6.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS A and B buttons to hOFF. Otherwise sound is output from the speakers. NOTE When the headphones are plugged in: -The Dolby Pro Logic or DSP system is automatically canceled -The Dolby Digital surround mode or the DTS surround mode is changed to the “2chSTEREO (2CH DOWNMIX)” mode to HON. To use speaker system B: Set the FRONT SPEAKERS B button to HON. To use both speaker systems: Set both the buttons to HON. Set the button(s) to hOFF to turn off the speaker system(s). NOTE As the front speaker systems A and B are connected in series: -The sound will decrease slightly when using both speaker systems -No sound can be heard if the FRONT SPEAKERS A and B buttons are set to HON when only one speaker system is connected To turn the unit off, press the POWER button. POWER ECONOMIZING (ECO) MODE Setting this unit to the ECO mode reduces power consumption as below. Initial setting of the ECO mode is ON. • When the current time is set, the clock display disappears immediately. • While the power is off, all the display lights turn off, and only the indicator on the left side of the display window lights in red. To cancel the ECO mode 1 Press the ECO button to display ECO MODE while the unit is turned on. 2 Within 4 seconds, press the ENTER button. 3 Within 4 seconds, turn the MULTI JOG to select ECO OFF. The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3. 7 ENGLISH SOUND SOUND BBE SYSTEM CUSTOM AUDIO ADJUSTMENT PREPARATIONSSOUND The BBE system enhances the clarity of high-frequency sound. Press the BBE button. Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference. NOTE VOLUME CONTROL Turn the VOLUME control on the unit, or press the VOLUME buttons on the remote control. The volume level is shown on the display for four seconds. It can be adjusted between 0 and MAX (31). It flashes when set over the level of 27. The volume level remains memorized even after the power is turned off. However, if the power is turned off when the volume is set to 17 or more, it is automatically set to 16 the next time the power is turned on. To adjust the left/right balance of the front speakers Press the BALANCE button to display “L/R 0dB”. Then press the Nor Mbutton repeatedly or turn the MULTI JOG within four seconds. Note that the front speaker balance for DOLBY SURROUND and DTS SURROUND is also changed. To mute the sound temporarily Press the MUTING (MUTE) button (–20 dB). “MUTE ON” appears on the display for four seconds.While muting the sound, the selected function indicator flashes. Press the MUTING button again to restore the sound. • The BBE system is automatically canceled and cannot be turned on: -When the DIGITAL mode is selected -When the Dolby Pro Logic is turned on SUPER T-BASS SYSTEM The T-BASS system enhances the realism of low-frequency sound. Press the T-BASS button. Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference. NOTE Low-frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low-frequency sound is originally emphasized. In this case, cancel the T-BASS system. SOUND ADJUSTMENT DURING RECORDING The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording. EnEnEnEnEn ENGLISH 8 SETTING NEW EQUALIZATION CURVES ELECTRONIC GRAPHIC Up to 5 equalization curves can be stored as the manual modes EQUALIZER M1 to M5. This unit provides the following five different equalization modes. ROCK: Powerful sound emphasizing treble and bass POP: More presence in the vocals and midrange JAZZ: Accented lower frequencies for jazz-type music CLASSIC: Enriched sound with heavy bass and fine treble BGM: Calm tone with suppressed bass and treble Press the GEQ (Graphic Equalizer) button, and turn the MULTI JOG until the desired equalization mode is displayed. The GEQ modes are displayed cyclically as follows. ROCK POP JAZZ CLASSIC M4M5 M3 M2 M1 BGM Manual mo...