Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts. • The appliance must be dry before it is placed back into service. Important! • Ethereal oils and organic solvents can attack plastic parts, e.g. – lemon juice or the juice from orange peel; – butyric acid; – cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. • Do not use any abrasive cleansers. Clean the appliance and the interior accessories with a cloth and + lukewarm water. Commercially available dish washing detergents may also be used. After cleaning wipe with fresh water and rub dry. + After everything is dry, switch to fast freeze. After running the appli + ance for two or three hours, it is ready again for storing frozen food. Once the frozen food has been placed in the freezer, return the fast freeze switch to the off position. Magnetic door seal After opening and closing the door of your freezer whilst it is in operation, you will not immediately be able to open the door again because a vacuum will have developed inside, keeping the door closed until the pressures inside and outside the door have equalised. After a few minutes you can easily reopen the door. Switching off the appliance To switch off the appliance, turn the temperature regulator to posi + tion "0". If the appliance is not going to be used for an extended period: Remove all deep-frozen packages as well as ice-trays. + Switch off the appliance by turning the temperature regulator to + position "0". Remove the mains plug or switch off or turn out the circuit breaker + or fuse. Defrost freezer and clean thoroughly (see section: “Defrosting and + Cleaning”). Leave the door open to avoid the build up of odours. + Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor. • Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings. • Do not place warm foods into the appliance. Allow warm foods to cool first. • Only leave door open as long as necessary. • Do not set temperature any colder than necessary. • Check the storage temperature in the freezer on the thermometer. • Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge. • Keep the heat emitting condenser, the metal grille on the rear wall of your appliance, always clean. What to do if ... Correcting Malfunctions Spare parts: The following spare parts can be ordered from your local AEG Service Force Centre. You can fit these yourself without any special skill or training, e.g.: – freezer drawers, – door handle A malfunction may be caused by only a minor fault that you can retify yourself using the following instructions. Please check whether the pilot lights come on, the refrigerating unit operates, and the internal temperature is being maintained. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case. Warning! Repairs to refrigerators/freezers may only be performed by competent service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Service Force Centre. If the freezer system has stopped working and the freezer is full, the reserve in the cold accumulator and in the deep frozen food itself will give the food a hold over time of about 25 hours. If the freezer is without a cold accumulator the hold over time will be reduced to about 17 hours. Symptom Possible Cause Remedy Appliance is not switched on. Switch on the appliance. Appliance does not work, Mains plug is not plugged in or is loose. Insert mains plug. no pilot light is illuminated. Fuse has blown or is defective Check fuse, replace if necessary. Socket is defective. Mains malfunctions are to be corrected by an electrician. Green light does not light up, yellow light lights up when the fast freeze function is activated. Green light faulty. Please inform your customer service. Yellow light does not light up, when the fast freeze function is activated, appliance is on. Yellow light faulty. Please inform your customer service. Appliance cools too much. Temperature is set too cold. Turn the temperature regulator to a warmer setting temporaily. Symptom The freezer temperature is not sufficient, red light lights up. Heavy build up of frost, possibly also on the door seal. Unsual noises. The compressor does not start immediately after changing the temperature setting. Possible Cause Temperature is not Please look in the “Initial properly adjusted. Start Up” section. Door was open for an extended period. Open the door only as long as necessary. Press the fast freeze switch. A large quantity of warm food plac...