|
Фрагмент инструкции
• The water and electrical locations for each product must be located as shown. • A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product. 25" Min. to Wall 0" 25" Min. to Wall130.Door Swing 130.Door Swing Clearances for Multiple Single Door Installations In a side-by-side installation of a left and right door swing product, the inside trims touch at the front, with a 1" clearance between the units at the rear. Order ZUG2 Unified Grille Panel 5" Kit for one continuous grille panel using a 1/4" framed or 3/4" overlay custom panel. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Clearances for two products installed side-by-side with right and left side hinges together Allow 5" minimum between the two products to prevent one door from striking the other. Use the WX14X99 adjustable door stop to reduce the factory set 130. door swing and to allow pan removal. NOTE: A unified grille panel kit will NOT fit this installation. Listed by Underwriters Laboratories Specification Created 6/08 110153 ZIF360NX GE Monogram® 36" Built-In Custom All-Freezer Dimensions and Installation Information All-Refrigerator, 5/16" All-Freezer 1/4" Framed Trim Door/ Reveal Panel Drawer If you choose to install framed panels, they must be cut to the dimensions shown. The panels 1/4" will slide into the frame on the Panel door and grille. If the panel is less than 1/4" thick, it must be backed up with filler material or foam tape to improve the fit. 1/4" Framed Panel Dimensions A (Width) B (Grille Height) C (Door Height) Framed Panel 33-7/8" 8-7/8" 69-5/16" IMPORTANT NOTE: Maximum weight A for the door panel is 67 pounds. Maximum total weight for the Grille Panel B assembled grille panel is 11 pounds. Door Panel C 3/4" Overlay Panel Dimensions A (Width) B (Grille Height) C (Door Height) 1/4" Backer Panel 33-7/8" 8-7/8" 69-5/16" 0.10" Spacer Panel 32-1/2" 7-5/8" 67-15/16" 3/4" Overlay Panel 34-1/8" 9" 69-9/16" For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. ZUG2 Grille Panel Dimensions The ZUG2 unified grille panel kit provides for the installation of a framed or overlay grille panel. A Grille Panel B Panel Dimensions A (Width) B (Grille Height) 1/4" Framed Panel 69-7/8" 8-7/8" Panel Dimensions A (Width) B (Grille Height) 1/4" Framed Panel 69-7/8" 8-7/8" 0.10" Spacer Panel 68-1/2" 7-5/8" 3/4" Overlay Panel 70-1/8" 9" IMPORTANT: Grille panel maximum total weight is 25 lbs.. Listed by Underwriters Laboratories Specification Created 6/08 110153 ZIF360NX GE Monogram® 36" Built-In Custom All-Freezer Dimensions and Installation Information All-Refrigerator, All-Freezer 3/4" Overlay Panel Overlay panels may be installed on trimmed units. The overlay panel must be secured to a 1/4" thick backer panel which slides into the trim. A 0.10" thick spacer panel must be pl...
Эта инструкция также подходит к моделям:Морозильные камеры - ZIF360NXRH (197.37 kb)
Морозильные камеры - ZIF360NXLH (197.37 kb)
Морозильные камеры - ZIF360NXLH (197.37 kb)
Морозильные камеры - ZIF360NXRH (197.37 kb)