Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Flat_lift_off_cover . 18”_wide_single_tier_overshelf . Stainless_steel_finish_on_back . Plastic_laminate_on_front . Additional_wire_shelves . Door_lock . Exterior_thermometer . Interior_lights . Glass_door(s) . *220V/50_Hertz_electrical_system ____*_Inclusion_of_this_option_will_alter_electrical_ specifications_of_the_unit. SPECIFICATIONS Exterior top is_one-piece,_22-gauge_stainless_steel_ with_integral_square_nosing_on_the_front. Exterior back and bottom_are_two-piece_24-gauge_ galvanized_steel._ Exterior ends_are_stainless_steel. Interior sides_are_thermoformed_ABS_plastic_with_ shelves_supported_on_plugs._Interior_back_is_onepiece_ 22-gauge_stainless_steel.__Interior_bottoms_are_ thermofoamed_ABS_plastic.__Base_is_fully_insulated_with_ high-density_foamed_in_place_polyurethane. Refrigeration system_uses_HFC-404A_refrigerant._ Compressor_is_1/5_H.P.,_with_condenser_coil_and_hot_ gas_condensate_evaporator_mounted_on_rear_of_the_ cabinet._Evaporator_coils_are_located_on_the_interior_ rear_wall_of_the_cabinet._Refrigerant_flow_is_controlled_ by_a_capillary_tube._Cabinet_maintains_an_interior_ cabinet_temperature_of_-5°F_to_0°F_(-20°C_to_-18°C). Electrical connection_is_115_volt,_60_Hertz,_single_ phase._Unit_has_a_7’_(2.1m)_long_electrical_cord_and_ NEMA_5-15P_plug. Casters_Equipment_is_mounted_on_2”_(5.08cm)_(2.5”_ ride_height),_diameter_plate_casters_with_front_two_ locking._ Door_has_a_24-gauge_stainless_steel_exterior,_with_ thermoformed_ABS_plastic_interior_liner. 980_S._Isabella_Road Mt._Pleasant,_MI_48858 Phone:_800-733-8948 Fax:_800-669-0619 Email:_info@delfield.com Approval__________________ Date_____________________ 4560N Front-Breathing Flat Top Freezer Base Model #__________ CSI Section Printed in the USA. 07/07 DS4560N 980 S. Isabella Road Mt. Pleasant, MI 48858 Phone: 800-733-8948 Fax: 800-669-0619 Email: info@delfield.com MODEL #OF SHELF STORAGE VOLTS/HERTZ/ NEMA SHIP NUMBER SHELVES AREA SQ. FT. CAP. CU. FT. H.P. PHASE AMPS PLUG WEIGHT 4560N 2 7.36 15.7 1/3+ 115/60/1 12 5-15P 340 lbs/ 154kg Mechanical Data — Standard Unit INSTALLATION NOTE: Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties. PLEASE NOTE: Air flow through the louver on the back of the unit is not necessary for operation, however, any air which passes through the louver is 4560N ISO VIEW beneficial. 4560N ELEVATION VIEW 4560N RIGHT SIDE VIEW ............................ .............................................................. ............................................................ ........................ .............................. ........................ ........................ .................................. ............................ .............................. ............................ ...................... ............................ .......... .................... ........................ .............................. ............................ ........................................ .............................. .................................... ............................ .............................. ............................ ............................ ............................ .......................... .......................... ............................ ............................ ............................ ............................ ...................... ............................ .......... .................... .............................. ............................ ............................ ............................ .......................... .......................... ............................ ............................ ............................ ............................ ...................... ............................ .......... .................... .............................. ............................ ............................ ............................ .......................... .......................... ............................ ............................ ............................ ............................ ...................... 4560N ISO VIEW ...