Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system. Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior. Doors: Double paned tempered thermopane glass. Constructed with a combination of extruded aluminum and PVC. Each door has two edgemount, self-closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Door handle is continuous along vertical dimension of the door. Door gaskets are magnetic and mount to the door, snapping in place and removable with out tools. Keyed door lock is mounted to the door. Lock engages into a heavy duty strike mounted to the cabinet face. Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between -5.F and 0.F in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system. Electrical: Standard electrical on one section units shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Two and three section units shall be 115/208-230 and will require hardwire connections. Specifications Specification Line ® : Glass Door Reach- In Freezer 980 S. Isabella Rd. Phone: 800-733-8948 or 989-773-7981 Mt. Pleasant, Michigan 48858 Fax: 800-669-0619 Delfield ™ ® 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858 Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 Specification Line® Self-Contained Glass Door Reach-In Freezer Printed in the U.S.A. DSSSF-G 06/08 Mechanical Data MODEL NUMBER VOLTAGE AMPS STORAGE CU.FT. SHELVES SQ.FT. NO. OF SHELVES UNIT H.P. BTU/HR SYSTEM CAP SHIP WEIGHT NEMA PLUG ENERGY (KWH) SSF1-G, SSF1-GH, SAF1-G, SAF1-GH, SMF1-G, SMF1-GH 115 11.5 24.96 12.81 3 3/4 1923 440lbs (200kg) 5-15P 11.29 SSF2-G, SSF2-GH, SAF2-G, SAF2-GH, SMF2-G, SMF2-GH 115/208-230 10.0 51.92 27.54 6 1 4793 710lbs (322kg) N/A 19.95 SSF3-G, SSF3-GH, SAF3-G, SAF3-GH, SMF3-G, SMF3-GH 115/208-230 11.4 78.89 42.47 9 1 5940 960lbs (435kg) N/A 29.07 END VIEW 1 SECTION UNITS ELEVATION VIEW SSF1-G, SAF1-G, SMF1-G ELEVATION VIEW SSF1-GH, SAF1-GH, SMF1-GH ELEVATION VIEW SSF2-G, SAF2-G, SMF2-G ELEVATION VIEW SSF2-GH, SAF2-GH, SM2-GH PLAN VIEW SSF1-G, SAF1-G, SMF1-G SSF1-GH, SAF1-GH, SMF1-GH PLAN VIEW SSF2-G, SAF2-G, SMF2-G SSF2-GH, SAF2-GH, SMF2-GH PLAN VIEW SSF3-G, SAF3-G, SMF3-G SSF3-GH, SAF3-GH, SMF3-GH ELEVATION VIEW SSF3-G, SAF3-G, SMF3-G ELEVATION VIEW SSF3-GH, SAF3-GH, SMF3-GH 30" 58" 6.12 81.12 29.00” 73.7cm 34.00” 86.4cm 56.00” 142.2cm SPECIFICATION LINE SPECIFICATION LINE 25.00" 63.5cm 52.00" 132.1cm 34.00” 86.4cm 48.00” 121.9cm 44.00" 111.8cm 34.00” 86.4cm 30" 58" 6.12 81.12 56.00” 142.2cm 83.00” 210.8cm SPECIFICATION LINE SPECIFICATION LINE 52.00" 132.1cm 79.00" 34.00” 200.7cm 86.4cm 34.00” 86.4cm 48.00” 121.9cm 44.00" 111.8cm 34.00” 86.4cm 30" 58" 6.12 56.00” 142.2cm 83.00” 210.8cm SPECIFICATION LINE SPECIFICATION LINE 52.00" 132.1cm 79.00" 34.00” 200.7cm 86.4cm 34.00” 86.4cm 48.00” 121.9cm 44.00" 111.8cm 34.00” 86.4cm ...... ...... ........ .......... .......... .......... .......... .......... .................................... .................................... ...... ...... ........ .......... .......... .......... .......... .......... .......... .................................... .................................... END VIEW 2 & 3 SECTION UNITS ...