Оценок - , средний балл:
(
)
)
Производитель: Creda
Размер: 294.71 kb
Название файла: CM311I.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
694527.qxd 1/31/03 9:18 Page 2 IMPORTANT INFORMATION: Do not plug in and switch appliance on at the mains until installation is complete. . You may be charged for a service call if a problem with your appliance is caused by incorrect installation or misuse. Electrical Supply WARNING: This appliance must be earthed. Fuses Your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. Correct replacement is identified by colour coding or the marking on base of plug. WARNING: Do not use plug unless fuse cover is fitted. Changing the Plug Cut off and dispose of the supplied plug if it does not fit your socket. WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else. IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Green/Yellow -Earth Green and yellow (Earth) or Cord clamp 13A ASTA approved Blue -Neutral wire to terminal fuse to BS1362. Brown -Live marked ‘E’, If you change the plug, the colour of symboL, wires in the mains lead may not coloured green Brown (Live) correspond with the colour of the markings identifying terminals in the and yellow. wire to terminal plug. You should therefore wire it as marked ‘L’ or shown. Blue (Neutral) coloured red. wire to terminal Changing the Mains Lead marked ‘N’ or A special lead can be ordered from coloured black. our Service Department UK: 08709 066 066 or Republic of Ireland: 1850 302 220 If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician. CE marking certifies that this appliance conforms to the following EEC directives:Low Voltage Equipment - 72/23/EEC & 93/68 EEC Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC & 93/68/EEC WARNING: AVOID ACCIDENTS TO CHILDREN. WHEN DISCARDING AN OLD FRIDGE OR FREEZER BE CERTAIN TO MAKE THE LOCK UNUSABLE. IF POSSIBLE, REMOVE THE DOOR AND DISCARD SEPERATELY. DO NOT ATTEMPT TO SIT ON TOP OF YOUR APPLIANCE. IT IS NOT DESIGNED FOR SUCH USE AND YOU COULD INJURE YOURSELF OR DAMAGE THE APPLIANCE BY SUCH ABUSE. 2 694527.qxd 1/31/03 9:18 Page 3 Contents Page Installation Choosing a location 4 Installation 4 Door Reversal 5-6 Mounting the appliance 7-8 Get to know your Appliance 9-10 Getting your Appliance ready for use Final Check 10 Running in the Compressor 10 The Controls 11 Storing Food Storing Fresh Food 12 Freezing Fresh Food/Procedure 13 Storing Frozen Food 13 Defrosting Frozen Food 13 Caring for your Appliance Defrosting 14 Changing the Light Bulb 14 Cleaning 15 Going Away 15 Troubleshooting 16 After Sales Service 17 Guarantee 18 Key Contacts Back Cover Retention of the Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings. 3 694527.qxd 1/31/03 9:18 Page 4 Installation. WARNING: THE APPLIANCE SHOULD ONLY BE INSTALLED BY A QUALIFIED ELECTRICIAN IN COMPLIANCE WITH THESE INSTRUCTIONS, CURRENT STANDARDS AND REGULATIONS. Before Fitting: Before connecting to the electricity supply leave the appliance to stand for 2 hours to allow the cooling system to settle. Please read through this section before starting any work. At the base of the kitchen unit intended for installing the appliance, there should be at least 200cm2 free space, for adequate air circulation. Do not cover the air outlet grille at the top of the appliance. Your Integrated Fridge Freezer is designed to fit into a tall housing as shown (fig 1). It is vitally important that the appliance is vented correctly. Choosing a location: Your Integrated Fridge Freezer should be fitted into a kitchen unit space where it is easy to use. The power socket should be in a readily accessible position adjacent to the unit. Never place the appliance near a heat emitting device (eg. cooker, radiator, water heater or similar) and do not expose it to direct sunlight. In such a position your Fridge Freezer will have to work harder and will cost more to run and may be damaged by the heat. The appliance may be exposed to lower or higher temperatures but only for short periods of time and the temperature should never be lower than 5°C. The rear wall of the appliance gets warm during operation and water evaporates from the drain pan on the compressor. You must therefore provide adequate air circulation at the rear of the appliance. A (mm) B (mm) C (mm) Bottom door Top door Cabinet 846 840 1775-1780 Fig. 1 Plinth Ventilation 545 545 4 Installation (Door reversal). 5 1. Top hinge cover of the refrigerator door. 2. Top hinge of the refrigerator door. 3. Top strip. 4. Bottom hinge of the refrigerator door. 5. Top hinge of the freezer do...