30 60 0 90 ............................................, ...................... “................................ 3”. ....................................................................................... 1 2 3 4 PC 4:3 10:00 Таймер выключения 90 ............ RECALL ..........................“RECALL”, ............................................................................. 1 .................................................... 2 ............................ (..... ....... 17) 3 ...........
Turn the ENTER key by selecting the “>" mark and the screen displays the sub menu.(see WHITE BALANCE of page 27 and 28) Menu hierarchy MA N MENU - INPUT SIGNAL - WHITE BALANCE I- COLOR TEMP STORE DATA — TITLE EDIT l- GAIN/BIAS ADJ - GRATICULE - MODE SET - PRESET - PROTECT - PANEL ■ Menu screens 1. Main menu MAIN MENU ■=> INPUT SIGNAL WHITE BALANCE GRATICULE MODE SET PRESET PROTECT PANEL This is the top hierarchy menu. With this main menu, select the necessary sub menu. 25 2. IN
Settings : HIGH/LOW Function : Selects the colour temperature. HIGH : Sets the colour temperature to D93. LOW : Sets the colour temperature to D65™. Item : BLUE DRIVE Adjustment range : MIN ~ 000 ~ MAX (in 127 grades) Function : Adjusts the blue drive level. Item : RED DRIVE Adjustment range : MIN ~ 000 ~ MAX (in 127 grades) Function : Adjusts the red drive level. Item : GREEN CUTOFF Adjustment range : MIN ~ 000 ~ MAX (in 255 grades) Function : Sets the green cut-off point. Item : BLUE CUTOFF Ad
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION: Do not install or place this unit in a bookcase, built- in cabinet or in another confined space in order to keep well ventilation condition. Ensure that curtains and any other materials do not obstruct the ventilation condition to prevent risk of electric shock or fire hazard due to overheating. CAUTION: This ap
The adjustment status is displayed in the bottom right when selected. *4 When “VAR1”, “VAR2” or “VAR3” is selected, the monitor switches to WB adjustment mode page 17). *5 When selecting USER0-63 1) Push [ENTER] (USER changes to blue). 2) Select 0-63 with [V, A], ar|d push [ENTER]. 16 Main Menu (continued) ■ WB adjustment mode You can adjust “WHITE BALANCE VAR1” - “WHITE BALANCE VAR3” (WB) by selecting “VAR1” - “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu. The underlined values are
VIDEO Switches the input line to VIDEO. Edge/level operation INPUT SEL. SDI1 Switches the input line to SDI1. Edge/level operation INPUT SEL. SDI2 Switches the input line to SDI 2. Edge/level operation INPUT SEL. YPBPR/RGB Switches the input line to YPBPR/RGB. Edge/level operation INPUT SEL. DVI-D Switches the input line to DVI-D. Edge/level operation SD ASPECT Sets the aspect ratio for SD signal input. (Disabled during HD and PC signal input) Level operation (Short-circuited: 16:9, open: 4:3) S
How To Use On Screen Menu REMOTE CONFIG [REMOTE CONFIG] >GPI1 UNDEF GPI2 UNDEF GPI3 UNDEF GPI4 UNDEF GPI5 UNDEF GPI6 UNDEF GPI7 UNDEF GPI8 UNDEF REMOTE CONFIG menu With REMOTE CONFIG selected, the following menu will appear. GPI1–GPI8 Used to set the pin assignment of REMOTE control terminal. The settable items are same for each terminal. For each function of set-value, refer to the “REMOTE specifications.” Set-value (underlined is default value) UNDEF MARKER1 ON/OFF MARKER2 ON/OFF MARKER HALF*1
Operation using button other than the [INPUT] button is invalid. *1 The menu can be displayed when the lock is engaged. Only “CONTROL/LOCAL ENABLE” menu items are available when the lock is engaged. The picture/volume adjusting menu does not accept changes when the lock is engaged. The “LOCAL ENABLE” setting determines operations in lock mode. The key mark is displayed during lock engagement. MARKER [MAIN MENU] Key mark *2 Only available when “REMOTE” is selected under “CONTROL.” HOURMET
page 17) by 50%. Level operation (Connected: ON, Open: OFF) MARKER BACK BLACK*2 Reduces the brightness of the background outside the marker displayed in “GPI PRESET1” (.. page 17) to 0%. Level operation (Connected: ON, Open: OFF) CENTER MARKER Switches the center marker display ON/OFF. (When other markers are being displayed, this is superimposed on the other markers) Level operation (Connected: ON, Open: OFF) INPUT SEL. VIDEO Switches the input system to VIDEO. Edge operation INPUT SEL. Y/C Swi
The following data can be saved and loaded as user data files: . All menu settings (including the function settings of the buttons at the front of the monitor) with the exception of USER MODE LOAD/SAVE . Screen values which have been adjusted by the image controls Saving the user data Loading the user data When the MENU/EXIT button is pressed, the main When the MENU/EXIT button is pressed, the main 11 menu appears on the screen. menu appears on the screen. Using menu operations (see page 13), se