Quick Set-up Guide 1 2 3 All three legs should be the same length to provide a level platform for the telescope. A bubble level is included (inset) to assist in leveling. 4 7 Hold the telescope fork arm and place the bottom of the base inside the tripod mounting platform as shown. Place accessory tray on top of center leg brace by lining up the grooves on the tray to the post on the brace. 5 Once grooves are aligned, turn accessory tray until it snaps into the clips on each leg brace. 6 Thread t

Center and focus the object in the 25mm eyepiece of the telescope. 4 In order to accurately center an object in the eyepiece it may be necessary to change the slew speed of the motors. To change the slew speed, press the RATE button then select a number from 1 (slowest) to 9 (fastest). 5 With the object centered in the eyepiece, use the azimuth (right/left) and altitude (up/down) adjustment knobs on the finderscope to place the red alignment dot directly over the centered object. 6 7 Once you ha