Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
16 ASSEMBLING AND PREPARING
Installing to a wall
VESA (A x B)
100 x 100
ENGLISH
Stand Screw
M4
ENG
Install the monitor at least 10 cm away from the
Required Screws
4
wall and leave about 10 cm of space at each side
Wall Mount Plate
RW120
of the monitor to ensure sufficient ventilation. De-
(Optional)
tailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
10 cm
CAUTION
y yUnplug the power cord before moving or in-
10 cm
stalling the monitor to avoid electric shocks.
10 cm
y yInstalling the monitor on the ceiling or on a
slanted wall may result in the monitor falling
10 cm
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
To install the monitor to a wall, attach a wall mount-
store or a qualified installer.
y y
ing bracket (optional) to the back of the monitor.
Applying excessive force when fastening
Make sure that the wall mounting bracket is securely
screws may cause damage to the moni-
fixed to the monitor and to the wall.
tor. Damage caused in this way will not be
covered by the product warranty.
y y
1 Use the screws and wall mounting bracket that
Use the wall mounting bracket and screws
comply with the VESA standard.
that conform to the VESA standard. Dam-
2 Screws which are longer than the standard
age caused by the use or misuse of inap-
length may damage the inside of the monitor.
propriate components will not be covered
3 A non-VESA standard screw may damage the
by the product warranty.
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
NOTE
4 The monitor is VESA standard compliant.
y y
5 Use it according to the VESA standard as speci-
Use the screws specified by the VESA stan-
fied below.
dard.
y y
y y784.8 mm or less
The wall mount kit includes the installation
* Thickness of the wall mount plate: 2.6 mm
guide and all necessary parts.
y y
* Fastening screw: Diameter 4.0 mm x Pitch 0.7
The wall mounting bracket is optional. The
mm x Length 10 mm
accessories can be purchased at your local
y y787.4 mm or greater
retail store.
y y
* Use the wall mount plate and screws that con-
The length of the screw may differ for each
form to the VESA standard.
wall mounting bracket. Ensure the correct
length screw is used.
y yFor more information, please refer to the
user manual for the wall mounting bracket.
...Эта инструкция также подходит к моделям:
Мониторы - 29EA93-P (6.96 mb)