Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Rearview camera optional. This product must be installed and used only in accordance with these instructions. Any alteration of this product that enables it to be used in ways other than those stated in this manual could distract the driver and result in an accident or injury. AUDIOVOX ELECTRONICS CORP. DISCLAIMS ANY LIABILITY THAT MAY RESULT FROM A FAILURE TO INSTALL AND OPERATE AS INDICATED IN THESE MANUALS. Warning: Backing up vehicle Do not back up vehicle while watching the mirror/monitor screen. Always look in the direction of vehicle motion. Use the mirror/monitor as an aid in safety confirmation. The distance looks different in the monitor. The actual distance is shorter than it looks in the monitor. The range of image is limited. Beware of blind spots. Cautions 1. The product is intended to assist in safe driving and to allow the driver to have a broader rearview during reversing. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to the country and their local traffic regulations. . Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle. Audiovox Electronics Corp. cannot accept any responsibility whatsoever for accidents resulting from failure to observe these precautions or safety instructions 2. You are advised not to display the external video input while driving. 3. When using the hands free feature, you should observe the road situation carefully to avoid traffic accidents. Figure 1 I. Function and Operations Figure shows the function of rear view mirror. A: Rearview mirror E: Power indication (Red when ignition is on) B: 4" LCD panel F: Speaker volume control C: Hands free Microphone G: Switch 1 D: LCD brightness control H: Switch 2 J: 2-position switch for hands free K: Speakers microphone Sensitivity High/Low Select SW1 and SW2 Functions: 1. Vehicle Reversing: SW1: No Function LCD automatically turns on SW2: No Function Rearview camera image appears on the mirror/monitor 2. Vehicle Driving: SW1: Not enabled when vehicle is in motion SW2: When press and held, the rear camera image appears on the mirror/monitor. When released, the LCD will turn off. The mirror will return to its normal appearance. 3. Vehicle Parked: SW1: Press once to turn ON the external video and audio input (LED turns yellow). Press again to turn OFF the external video and audio input (LED returns to red). The vehicle parking brake must be engaged. SW2: When pressed and held, the rear camera image appears on the mirror/monitor. When released, the LCD will return to the previous state. II. OPERATION 1. The Mirror/monitor is ready for operation every time the Ignition key is turned on. The mirror/monitor turns off every time the Ignition is turned to the off position. 2. How to view the rear observation camera image A. The monitor will display the rear observation camera image whenever the vehicle is shifted into the reverse gear. The rear observation camera image turns off automatically any time the gear selector is moved out of the reverse position. B. If you want to view the rear observation camera image at any other time, press and hold switch button 2 on the rearview mirror. The image will remain on as long as switch button 2 is held on. Releasing the switch but...
Эта инструкция также подходит к моделям:Мониторы - RVMPKG1 (163.69 kb)