Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Figure 4.15: Update Driver - 2 25 Chapter 4 Figure 4.16: Update Driver - 3 Step 5: Complete the PCI-1602 Series Slave Bridge installation. Figure 4.17: Slave Bridge Installation Complete TPC-1261H User Manual 26 Step 6: Then, go to “Device Manager”. You can find “Advantech PCI1602 Series Slave Bridge” is on the list. Figure 4.18: PCI-1602 Device Manager Step 7: And then click “? PCI Serial Port” to update the driver. 27 Chapter 4 Figure 4.19: PCI Serial port Device Manager Figure 4.20: Update Driver - 1 TPC-1261H User Manual 28 Step 8: Follow the hardware update wizard as the figures below. Figure 4.21: Update Driver - 2 Figure 4.22: Update Driver - 3 29 Chapter 4 Step 9: Complete the Advantech PCI-1602 Series Master Bridge installation. Figure 4.23: PCI-1602 Master Installation Step 10: Then, follow the wizard the install the software for Advantech PCI serial ports as the below. Figure 4.24: PCI Serial Port Installation - 1 TPC-1261H User Manual 30 Figure 4.25: PCI Serial Port Installation - 2 Figure 4.26: PCI Serial Port Installation - 3 31 Chapter 4 Figure 4.27: PCI Serial Port Installation - 4 Figure 4.28: PCI Serial Port Installation - 5 TPC-1261H User Manual 32 Figure 4.29: PCI Serial Port Installation - 6 Figure 4.30: PCI Serial Port Installation - 7 33 Chapter 4 Step 11: After the steps are done, the software for the com3 and com4 is successfully installed. Go to “Device Manager” and find the list as below. Figure 4.31: Installation Complete 4.3 Entertainment Encryption/Decryption Driver Step 1: Insert the CD-ROM and go to “Device Manager”. Click “Entertainment Encryption/ Decryption Controller” Figure 4.32: Device Manager TPC-1261H User Manual 34 Step 2: Following the install shield wizard to finish the setup. Figure 4.33: Install Wizard - 1 Figure 4.34: Install Wizard - 2 35 Chapter 4 Figure 4.35: Install Wizard - 3 Step 4: The driver is successfully installed. You can check via “Device Manager” as the below. Figure 4.36: Driver Installation Complete TPC-1261H User Manual 36 5 Features in Windows XP Embedded Sections include: • EWF • HORM • Advantech Utilities CHAPTER Chapter 5 Features in Windows XP Embedded TPC-1261H supports the embedded Windows platform. This section outlines the important features (EWF and HORM), that are provided in Windows XP embedded. 5.1 EWF EWF stands for Enhanced Write Filter. It provides an upper filter in the storage device driver stack that redirects disk write operations to volatile (RAM) or non-volatile (disk) storage. EWF protects a volume from write access. The benefits are as the following. Write-protect one or more partitions on your system. Enable read-only media, such as CD-ROM or flash, to boot and run. Prolong the lifespan of write-sensitive storage, such as CompactFlash. TPC-1261H XPE provides EWF RAM RDG mode on system partition. All wirte to system partition will be redirected to RMA once this mode is enabled. This mode is manually enabled by customers after they finish all their changes on system such as installing their applications or adjusting system setting. Advantech provides a pair of utilities to operate EWF, OSLock and OSUnLock. The setting is stated in the section later. TPC-1261H User Manual 38 5.2 HORM HORM stands for Hibernate Once Resume Many. In HORM environment, a single hibernation file is used to boot the system repeatedly. To set a HORM environment, please follow the steps below. Please make sure EWF is disabled. You can run OSUnLock to disable EWF. Enable hibernation support: Run ‘power options’ in control panel, and then select ‘Enable Hibernation’ in hibernation pane. Enable EWF: Run OSLock, and then system reboot automatically. Open those software that customers want to directly use after system resume from hibernation. Hibernate via Advantech HORM utility: Please Click Start Menu->All Programs->Advantech->HORM HORM environment remains all along unless the following events occur: Run EWF commit command (ewfmgr c: -commit) and then reboot system. Select “Discard hibernation file” by clicking F8 when system is starting up Also, HORM cannot fit your system if free space in C partition is not enough. The hibernation file required is dependent on the RAM size you use on the system. In other words, the hibernation file is 512MB that is the same as memory size used on TPC-1261H-A1 or TPC-1261H-B1. 5.3 Advantech Utilities TPC-1261H provides the useful utilities for users to configure the HORM and EWF. 39 Chapter 5 5.3.1 Version Information Start menu-> All Programs -> Advantech This states the current XPE runtime information including hardware platform, version, build number, release date, XPE QFEs installed in component database and XP Pro Patches you installed manually. 5.3.2 OSLock and OSUnLock The two utilities assist users to enable or disable EWF. Please go to Start Menu-> All Programs-> Advantech. The default setting of EWF is disabled. Users can protect C partition from any disk writing via OSLock that is to enable EWF RAM REG Mode...
Эта инструкция также подходит к моделям:Мониторы - TPC-1261H (10.37 mb)
Мониторы - TPC-1261H (10.37 mb)
Мониторы - TPC-1261H (10.37 mb)
Мониторы - TPC-1261H (10.37 mb)