Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
• Reconfigure the resolution of your computer to make it less than or equal to the native resolution (1920 x 1200). Problem: Image has vertical flickering line bars. • Use “Clock” to make an adjustment. • Check and reconfigure the display mode of the vertical refresh rate of your graphics card to make it compatible with the LCD Display. Problem: Image is unstable and flickering • Use “Phase” to make an adjustment. Problem: Image is scrolling • Check and make sure the video signal cable (or adapter) is well connected. • Check and reconfigure the display mode of the vertical refresh rate of your graphics card to make it compatible with the LCD Display. Problem: Vague image (characters and graphics) • Use “Clock” to make an adjustment. If this problem still exists, use “Phase” to make an adjustment. Warning Signal Sometimes you may see warning messages for this LCD Display. This means that the LCD Display cannot correctly receive the signal from the computer graphics card. No Signal This message means that the LCD Display has been powered on but it cannot receive any signal from the computer graphics card. Check all the power switches, power cables, and signal cables. Out Of Range This message means that the signal of the computer graphics card is not compatible with the LCD Display. When the signal is not included in the compatibility mode we have listed in the Appendices of this manual, the LCD display will show this message. Product dimensions Technical specifications LCD Panel Technology TFT Color LCD (E-IPS) Native resolution 1920x1200 Active screen diagonal 24.1" (611 mm) Active screen area 518 x 324 mm Pixel Pitch 0.270 x 0.270 mm Visual Characteristic Maximum luminance 400 cd/m2 DICOM calibrated luminance 250 cd/m2 Image stabilization BLOS (Backlight sensor) Contrast ratio 1000:1 (typical) Aspect ratio 16:10 Viewing angle (CR>10) R/L 178 (typical), U/D 178 (typical) Display LUT 10 bit Response time (G-G) 5 ms Display Functions Gamma, Dicom Colors 16.8 million Connectivity and control Video Input DVI-I DisplayPort USB 2.0 (1 upstream, 2 downstream) OSD languages English, French, German, Spanish, Italian, Dutch, Simplified Chinese, Traditional Chinese, Korean, Japanese. Options Protective Cover Yes Touch Screen Yes Landscape/Portrait Yes Approvals EMC EN 60601-1-2; FCC-B; ICES-001, VCCI, KCC, CCC, BSMI Safety CE EN60601-1; UL 60601-1, c-UL, CCC, KCC, BSMI Mechanical characteristics Display dimensions (W x H x D) Landscape, w/o pedestal 579 x 382 x 106 mm Display weight With Stand : 15.4 kg (W/ Touch) Without Stand : 10 kg Display stand Tilt, height & swivel Power requirements External DC Power Supply 90V-264V (50Hz-60Hz) Standby Power < 1 W Power consumption 100 Watts Environmental Operating T (min-max) 0° to 35°C Humidity 5% - 90% (no condensation) Compatibility modes Standard Resolution Vertical Refresh (Hz) Horizontal Scan (kHz) IBM VGA 640x480 60 31.5 VESA VGA 800x600 60 37.9 VESA XGA 1024x768 60 48.4 VESA XGA 1152x870 60 54.36 VESA SXGA 1280x1024 60 63.96 UXGA 1600x1200 1920x1080 1920x1200 60 60 60 75 70.2 74.1 Regulatory Compliance Canada, European Union, United States This display has been tested and found to comply with IEC/UL/EN 60601-1 and IEC 60601-1-2 standards, and is certified to meet medical standard UL 60601-1 and CAN/CSA C22.2 No 601.1(C US Mark) which are related to electrical shock, fire and mechanical hazards only as shown on right UL mark on this page. The medical display, in addition to meeting medical requirements, has been tested and found to comply with the limits for Federal Communications Commission (FCC) Class B computing devices in a typically configured system since many medical offices are located in residential areas. It is the system integrator’s responsibility to test and ensure that the entire system complies with applicable electromagnetic compatibility (EMC) laws. Barco NV has made great efforts to support the medical device industry, in particular, medical device manufacturers and medical device system integrators. We offer state-of-the-art color displays that are compliant with worldwide accepted medical device safety standards, and for the European market, CE-marked displays based on compliance with counsel directive 93/42/EEC—commonly referred to as the Medical Device Directive (MDD). The following summarizes our qualification of these displays as it relates to compliance with the MDD. The European Medical Device Directive requires that the intended use of the device be defined. The intended use of these displays is “to display alphanumeric, graphic, and image data as inputted from any type of medical device.” These displays do not provide a measurement function in any way, and it is the device and systems manufacturer’s responsibility to verify its function in the integrated device or system. The display was classified as required by the MDD according to Annex IX of the directive and the medical device (MEDDEV) guidance available at the time of classification. Be...
Эта инструкция также подходит к моделям:Мониторы - MDRC-2124 (568.8 kb)