Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. Your rights to the software are governed by the accompanying software license agreement. The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Apple Computer, Inc. 1 Infinite Loop Cupertino, CA 95014-2084 408-996-1010 Apple, the Apple logo, ColorSync, Mac, Macintosh, and Power Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Finder is a trademark of Apple Computer, Inc. ENERGY STAR is a U.S. registered trademark. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc. Portions © Pantone, Inc. 1995. VESA Display Data Channel (DDC) is a trademark of the Video Electronics Standards Association. Simultaneously published in the United States and Canada. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. Contents 1 About Your Apple Studio Display 5 Important Safety Instructions 5 Setting Up Your Display 6 What’s Next 10 Finding Answers 12 2 Installing the Apple Displays Software 13 About Your Apple Displays Software 14 Adjusting the Display 14 3 Troubleshooting 15 4 Using Your Display Stands 19 Storing the Keyboard 22 Changing the Display Stand 22 5 Safety, Health, and Maintenance 27 Healthy Use of Your Computer Equipment 28 General Maintenance 29 Protecting Your Display From Theft 30 Do You Need to Install a Graphics Card? 30 Conserving Energy 31 Appendix Technical Information 33 Communications Regulation Information 37 Flip-out stand Power cord Manual and service Flip-out stand Power cord Manual and service and support materials Software Power adapter CHAPTER CHAPTER 1 About Your Apple Studio Display Important Safety Instructions m Turn off the computer before setting up your Apple Studio Display. Leave the computer plugged into a grounded outlet. Important The only way to disconnect the monitor’s power completely is to unplug the power cord from the computer or electrical outlet. Make sure at least one end of the power cord is within easy reach so that you can unplug the display if you need to. m Don’t press or put hard objects against the screen. m Read all the setup instructions carefully before you plug your display into a power source. Warning Use only the power adapter that came with your display. Adapters for other computer equipment may look similar, but they may damage your display. This equipment is intended to be electrically grounded. This is a safety feature. Your power cord has a plug that has a third grounding pin. Be sure to connect it only to a grounded outlet. If you are unable to insert the plug into the outlet, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose of the grounding plug! If your power cord connects directly to the power socket on your computer, be sure that the computer is grounded. For additional safety information, see Chapter 5, “Safety, Health, and Maintenance.” Choosing a Good Location for Your Display When determining where to place your display, keep the following points in mind: m Make sure the power adapter cable, power cord, and display cables easily reach from the back of the display to your computer and an electrical outlet or power strip. m All cables should be unobstructed when you adjust the display. If you don’t allow enough clearance, the connectors might be damaged when the cables hit an obstruction. Setting Up Your Display Step 1: Place the display cable in the cable guide. Cable guide Important Make sure you leave some slack in the cable so you can tilt, swivel, and turn the display. Chapter 1 Step 2: Plug in the displayOs power adapter. Plug the display’s power cable into the power adapter. Plug the power adapter cord into a grounded wall outlet or power strip. (Some cords may connect to the power socket in the back of your computer.) About Your Apple Studio Display Step 3: Plug In the displayOs DVI and USB connectors. Plug the DVI connector into the computer here. Plug the USB connector into the computer here. Although your graphics card may have two monitor ports, connect your Apple Studio Display to the Digital Visual Interface (DVI) port only. Important You can use only one monitor connected to your graphics card at a time. Chapter 1 Step 4: Connect a USB keyboard to the display, if desired. Connect your USB key...