Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Acer, модель K272HUL

Производитель: Acer
Размер: 1.68 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. Power saving The monitor will be switched to "power saving" mode by the control signal from the display controller, as indicated by the amber-colored power LED. Mode LED light On Blue Power saving Amber The power saving mode will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from "power saving" mode back to "on" is around 3 seconds. Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B standard. English EnglishEnglish 6 Connector pin assignment 19-pin Color Display Signal Cable* PIN No. Description PIN No. Description 1 TMDS Data2+ 2 TMDS Data2 Shield 1357911 810 46 2 1315171912141618 3 TMDS Data2– 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1– 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0– 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock– 13 CEC 14 Reserved (N.C. on device) 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect * only for certain models 7 English 24-pin color display signal cable* PIN No. Description PIN No. Description 1 TMDS data 213 NC 2 TMDS data 2+ 14 +5 V power 3 TMDS data 2/4 shield 15 GND (return for +5 V hsync.vsync) 4 NC 16 Hot-plug detection 5 NC 17 TMDS data 06 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 NC 20 NC 9 TMDS data 121 NC 10 TMDS data 1+ 22 TMDS clock shield 11 TMDS data 1/3 shield 23 TMDS clock+ 12 NC 24 DDC TMDS clock- 20-pin color display signal cable* PIN No. Description PIN No. Description 1 11 Lane0(p) GND 2 GND 12 Lane3(n) 3 Lane0(n) 13 Config1 4 Lane1(p) 14 Config2 5 GND 15 AUX_CH (n) 6 Lane1(n) 16 GND 7 Lane2(p) 17 AUX_CH (p) 8 GND 18 Hot Plug Detect 9 Lane3(n) 19 DP Power_Return 10 Lane3(p)20 DP Power * only for certain models 8 Standard timing table English 1 VGA 640x480 60 Hz 2 VGA 640x480 75 Hz 3 VESA 720x400 70 Hz 4 SVGA 800x600 60 Hz 5 SVGA 800x600 75 Hz 6 XGA 1024x768 60 Hz 7 XGA 1024x768 75 Hz 8 VESA 1152x864 75 Hz 9 VESA 1280x720 60 Hz 10 WXGA 1360x768 60 Hz 11 SXGA 1280x1024 60 Hz 12 SXGA 1280x1024 75 Hz 13 UXGA 1600x1200 60 Hz, RB 14 WSXGA+ 1680x1050 60 Hz 15 UXGA 1920x1080 60 Hz 16 WUXGA 1900x1200 60 Hz, RB 17 UXGA 2048x1152 60 Hz, RB 18 WQHD 2560x1440 60 Hz 19 WQHD 2560x1440 60 Hz, RB 9 English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computer's ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории