|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
•Off / On Change PIN The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close button. The product has memorised your new PIN. PIP MENUm >System >PIP >ENTERE System PIP Auto Protection Time Screen Burn Protection Ticker Video Wall Off Off Off -The displayed image may differ depending on the model. -For PIP sound, refer to the Sound Select instructions. -If you turn the product off while watching in the PIP mode, PIP mode will remain after power Off/On. -You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main screen to view a game or karaoke. PIP Settings The picture from the external video source will be in the main screen and the picture from the product will be in the PIP sub- picture screen. Main picture Sub picture PC AV AV PC, DVI, HDMI1, HDMI2, DisplayPort, MagicInfo HDMI1, HDMI2, DVI, DisplayPort, MagicInfo AV • PIP (Off / On): Activate or deactivate the PIP function. • Source: You can select a source of the sub picture. • Size ( , , , , , ): Select a size for the subpicture. • Position ( , , , ): Select a position for the sub-picture. . In ( , , ) mode, you cannot select Position. • Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture. 141 Auto Protection Time MENUm >System >Auto Protection Time >ENTERE System Auto Protection Time Screen Burn Protection Ticker Video Wall Source AutoSwitch Settings Off Off -The displayed image may differ depending on the model. If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. •Off / 2 hours / 4 hours / 8 hours / 10 hours Auto Protection Time MENUm >System >Auto Protection Time >ENTERE System Auto Protection Time Screen Burn Protection Ticker Video Wall Source AutoSwitch Settings Off Off -The displayed image may differ depending on the model. If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. •Off / 2 hours / 4 hours / 8 hours / 10 hours Screen Burn Protection MENUm >System >Screen Burn Protection >ENTERE Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off Off Off To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to programme the time between movements of the picture in minutes. Pixel Shift Minimize image retention by finely moving pixels horizontally or vertically. • Pixel Shift (Off / On) . Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On. • Horizontal: Sets how many pixels the screen moves horizontally. • Vertical: Sets how many pixels the screen moves vertically. • Time: Set the time interval for performing the horizontal or vertical movement, respectively. Available Pixel Shift Settings and Optimum Settings. Available Settings Optimum Settings -The displayed image may differ depending on the model. Horizontal (pixels) 0~4 4 Vertical (pixels) 0~4 4 Time (minute) 1 min~4 min 4 min . The Pixel Shift value may differ depending on the product size (inches) and mode. . Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the product. . This function is not available in the Screen Fit mode. Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off Off Off Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off Off Off -The displayed image may differ depending on the model. Timer You can set the timer for Screen Burn Protection. The Pixel Shift feature stops automatically after a specified period of time. Timer • Off • Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period). • Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End Time). . The option is enabled only when Clock Set is configured. . Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval. • Mode: Select a screen protective pattern to display. -Pixel: Pixels on the screen alternate black continuously. -Rolling bar: A vertical bar moves left to right. -Fading screen: The entire screen becomes brighter, then darker. . The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or time. • Period: Specify the time interval to activate the Screen Burn Protection function. . The option is enabled when Repeat is selected for Timer. • Time: Specify the duration to keep the Screen Burn Protection function on. ....