Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Switch your old device on again and set the applicable values under "Display Properties" in accordance with the aforementioned options in this case. 7 Start-Up Windows Vista®: Display Personalization The integral screen has a native resolution of 1440 x 900 pixels. If you change to a presentation with different characteristics in the Windows “Personalization” Help Program, the display will not appear on the whole area of the screen, among other effects. Using a higher resolution can lead to distortion of the display, especially with text. Using a lower resolution may cause the display to use only a portion of the screen area. You will adjust the presentation to the mode supported with the Windows “Personalization” Help Program. Connecting the Monitor To start using the TFT monitor straight away, please read the "Safety and Precautions" section (page 2). We recommend that you also read all the other sections as these contain detailed explanations and tips on how to use your TFT display. Power supply VGA connector Audio con- nector (Ill.: Rearside connectors) • Ensure that the TFT monitor is not yet connected to the line power (power cord not yet plugged in) and neither the TFT monitor nor the computer is switched on. • Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT. .. Connecting Signal Cable • Plug the data cable into the matching VGA connections on the computer and the monitor. .. Connecting Audio Cable • Plug the audio cable into the matching sockets on the computer and the TFT monitor. .. Connecting the Power Supply • Plug the power supply cable into the power supply socket of the TFT screen and plug the electric plug into a socket close to the TFT screen (same circuit). • Switch your monitor on using the on/off switch. Then switch on your computer. English DE Positioning of the Monitor Please ensure that the monitor is set up in such a way that that reflections, glare and light-dark contrast are avoided (as this will make the screen less attractive to look at). EN (Ill.: Monitor positioning) Your posture Sitting in one position for long periods can be uncomfortable. To minimize the potential for physical discomfort or injury, it's important that you maintain proper posture. Back -While sitting at your work surface, make sure your back is supported by the chair's backrest in an erect position or angled slightly backwards. Arms - Your arms should be relaxed and loose, elbows close to your sides, with forearms and hands approxi mately parallel to the floor. Wrists - Your wrists should be as straight as possible while using the keyboard, mouse or trackball. They should not be bent sideways, or more than 10 degrees up or down. Head - Your head should be upright or tilted slightly forward. Avoid working with your head or trunk twisted. Legs - Your thighs should be horizontal or angled slightly downward. Your lower legs should be near a right an gle to your thighs. Your feet should rest flat on the floor. If necessary, use a footrest, but double check that you have your seat height adjusted correctly before getting a footrest. Overall - Change your position frequently and take regular breaks to avoid fatigue. 9 Start-Up Working Ergonomics (Ill.: Workplace) • Hand’s support rest: 2” – 4” • Top line of screen should keep eye’s level or be a little beneath • Eye’s distance to screen: 20” – 28” • Legroom (vertical): at least 26” • Legroom (horizontal): at least 24” The illustration above should give you a guideline for an ergonomic workplace. 10 English DE Controls EN (Ill.: Front view controls) Function Description Menu/Enter When this key is pressed the OSD (ON screen display) starts on your TFT monitor Confirm you selection by pressing this key. • When OSD is active this key sets a parameter value and decreases it. Executing it directly lowers the volume. Decrease volume • When OSD is active this key sets a parameter value and increases it. Executing it directly raises the volume. Increase volume Auto With this key you can automatically adjust the image. Power With this switch you can switch the TFT monitor ON and OFF. Operation Indicates the operating state. indicator Blue = Normal mode, Orange = Stand-by mode Controls 11 Setting the TFT Monitor You can set certain parameters for the TFT monitor on the OSD menu (ON screen display). How to operate the OSD menu 1. Press the menu key to activate the OSD. 2. Select the options from the main menu with the function selection keys ../... 3. Confirm your choice with the MENU key. 4. Select the options from the sub-menu with the function selection keys ../... 5. Confirm your choice with the MENU key. 6. Set the desired value with the function selection keys ../... Leaving the OSD menu To exit the OSD menu you have different possibilities: • Choose Exit. • The OSD vanishes from the screen automatically, when you do not press any key on the monitor during the preset time interval (factory setting is 10 seconds). OSD Menu The...