Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
LED LCD MONITOR MODEL 22EN43V 23EN43V 24EN43V 24EN43VS 27EN43V 2 ENGLISH ENG TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 6 - Detaching the Stand Base 7 - Mounting on a table 7 - Using the cable holder 9 - Mounting on a wall 10 USING THE MONITOR SET 10 Connecting to a PC 10 - D-SUB connection 10 - DVI-D connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 13 Customizing Settings 13 - Menu Settings 14 - Picture 15 - Color 16 - Display 16 - Volume 17 - Others 18 MY KEY Setting 19 FUNC. Setting 19 - Picture Mode 20 - SUPER ENERGY SAVING 21 - DUAL DISPLAY 21 - DUAL WEB 22 - MY KEY Setting 23 TROUBLESHOOTING 25 SPECIFICATIONS 25 22EN43V 26 23EN43V 27 24EN43V 28 24EN43VS 29 27EN43V 30 Preset Modes (Resolution) 30 HDMI TIMING 30 Indicator 31 PROPER POSTURE 31 Proper posture for using the Monitor set. 3 ASSEMBLING AND PREPARING ENGLISH ENG ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. D-SUB Cable DVI-D Cable (This cable is not included in all countries.) CD(Owner's Manual) / Card or ( Depending on the country ) ( Depending on the country ) AC-DC Adapter Power Cord AC-DC Adapter Stand Body (22EN43V/ 23EN43V/24EN43V/24EN43VS) Stand Body (27EN43V) Two Screws (27EN43V) Stand Base CAUTION yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. NOTE yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. ASSEMBLING AND PREPARING 4 ENG ENGLISH Parts and buttons Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.10) Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 27EN43V Attach the Stand Body to the monitor set. Use two screws to fix the Stand Body and monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. 1 2 3 4 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Stand Body 22EN43V/23EN43V/24EN43V/24EN43VS 2 Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. 1 2 3 Stand Body Stand Body Stand Base Stand Base Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 27EN43V Turn the screw to the left with a coin. Pull out the Stand Base from the Stand Body. Remove two screws and pull out the Stand Body from the monitor set. 1 2 3 22EN43V/ 23EN43V/24EN43V/24EN43VS 2 Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3 Stand Body Stand Body Stand Body Stand Base Stand Body Stand Base Stand Base CAUTION yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 3 Press (Power) button on the bottom switch panel to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. Cable holder or WARNING Using the Kensington security system When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front Rear Model 22EN43V 23EN43V 24EN43V 24EN43VS 27EN43V VESA (A x B) 75 x 75 100 x 100 Standard screw M4 Number of screws 4 Mounting on a wall For proper ventilat...