Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Acer, модель B286HL

Производитель: Acer
Размер: 389.13 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


1. To clean the LCD monitor screen: Turn off the LCD monitor and unplug the power cord. Spray a non-solvent cleaning solution onto a rag and clean the screen gently. 2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature. 5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage. 6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur: Monitor-to-PC signal cable is frayed or damaged. Liquid spills onto the LCD monitor or the monitor is exposed to rain. The LCD monitor or case is damaged. English Package contents LCD monitor Power cord Audio cable (optional) VGA cable (optional) DVI cable (optional) DP cable (optional) USB cable (optional) Quick start guide Attaching the monitor to the base 1. Remove the monitor from the packaging. 2. Attach the footstand to the base. (for selected models) 3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models) 4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models) Connecting your monitor to a computer 1. Turn off your computer and unplug your computer's power cord. 2. Connect the signal cable to the VGA and/or DVI-D (optional) and /or DP (optional) and/or DP (optional) output the computer. Then tighten the signal cable connector. 3. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable. 4. Connect the USB Cable(Optional) Connect the USB 3.0 cable to port for fast charge. Connect the USB 3.0 cable to port. 5. Insert the monitor power cable into the power port at the back of the monitor. 6. Plug the power cords of your computer and your monitor into a nearby electrical outlet. USB USB USB3.0 port -supporting fast charge USB3.0 port HDMI cable (Optional) MHL cable (Optional) MHL input socket of the monitor, and the and/or HDMI(optional) and/or MHL(optional) VGA and/or DVI-D (optional) and/ or MHL(optional) and/or HDMI(optional) socket of the graphics card on the thumbscrews on English English External controls 1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates standby/ power saving mode. 3&4 Minus / Plus If the OSD is active, press the Minus or Plus buttons to toggle between the OSD options. If the OSD is inactive, press the Minus or Plus buttons to adjust the volume. (Optional) 5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD. 6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press Auto and the monitor will automatically optimize the display position, focus, and clock of your display. Empowering a. When the OSD menu is active, this button will act as the exit key ( exit 7 Key OSD menu). b. When the OSD menu is inactive, press this button to select scenario mode. Regulations and safety notices FCC notices This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the device and receiver. . Connect the device into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/television technician for help. CE declaration of conformity Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations. Notice: Peripheral devices Only peripherals (input/out...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории