Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Select “Yes” and press “SET” button to restore to factory preset data. Press “EXIT” button to cancel and then return to the previous menu. 28 User Manual BDL5231V/00 Main-Menu SCREEN H POSITION Controls Horizontal Image position within the display area of the LCD. Press + button to move screen to right. Press -button to move screen to left. V POSITION Controls Vertical Image position within the display area of the LCD. Press + button to move screen to UP. Press -button to move screen to DOWN. CLOCK * : INPUT PC-A only Press + button to expand the width of the image on the screen the right. Press -button to narrow the width of the image on the screen the left. CLOCK PHASE * : INPUT PC-A only Improves focus, clarity and image stability by increasing or decreasing this setting. ZOOM MODE You can select “FULL”, “NORMAL” and “CUSTOM” and “REAL”. (INPUT HDMI,DVI-D,PC-A only) You can also select “FULL”,“NORMAL” “DYNAMIC” and “CUSTOM” and “REAL”. (INPUT CVI, VIDEO(S), VIDEO only) Selecting “DYNAMIC” will make the screen display panoramic with the expansion of the middle and outside of the screen changed. (The upper and the bottom of the image will be cut by expansion.) Dynamic image is the same as FULL size image when HDTV signal is input. Selecting “REAL” image will be displayed 1 by 1 pixel. 29 User Manual BDL5231V/00 CUSTOM ZOOM “CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode. ZOOM: expands the horizontal and the vertical size simultaneously. HZOOM: expands the horizontal size only. VZOOM: expands the vertical size only. H POSITION: moves to the right with + button. moves to the left with – button. V POSITION: moves up with + button. moves down with – button. SCREEN RESET Selecting Screen reset allows you to reset all OSD settings from PICTURE setting. Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu. 30 User Manual BDL5231V/00 Main-Menu AUDIO BALANCE Adjusts the balance of L/R volume. Press + button to move the stereo sound image to right. Sound of the left side will be small. Press -button to move the stereo sound image to left. TREBLE It is to accentuate or reduce the high frequency sound. Press + button to increase TREBLE sound. Press -button to decrease TREBLE sound. BASS It is to accentuate or reduce the low frequency sound. Press + button to increase BASS sound. Press -button to decrease BASS sound. SPEAKER AUDIO RESET Selecting Audio reset allows you to reset all OSD settings from AUDIO setting. Select “YES” and press “SET” button to restore the factory preset. Press “EXIT” button to cancel and then return to the previous menu. 31 User Manual BDL5231V/00 Main-Menu PIP (PICTURE IN PICTURE) Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. PIP SIZE Selecting the size of picture inserted at the “Picture-in-Picture” (PIP) mode. “Large”, “Middle” and “Small” are available. PIP AUDIO Selecting the sound source in PIP mode. When selecting “MAIN AUDIO”, you will get the sound for the main picture and when selecting “PIP AUDIO”, you will get the sound for the picture instead. PIP RESET Selecting PIP Reset allows you to reset all OSD settings from PIP setting. Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu. 32 User Manual BDL5231V/00 Main-Menu CONFIGURATION 1 AUTO ADJUST * : INPUT PC-A only Press "SET" button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level. Press " EXIT " button to cancel execution AUTO ADJUST and then will return to the previous menu. POWER SAVE Selecting RGB "ON", the monitor will go to power management mode when HDMI, DVI-D,PC-A, sync is lost. Selecting VIDEO "ON", the monitor will go to power management mode after about 10 minutes delay from when CVI and VIDEO input signal is lost. LANGUAGE OSD control menus are available in eight languages. (English, German, French, Italian, Spanish, Polish, Turkish, Russian, Simple Chinese) PANEL SAVING Select "PANEL SAVING" functions to reduce the risk of the "image persistence". COOLING FAN: The cooling fan will be auto-turned on and off according to temperature of monitor when selected “AUTO”. The cooling fan will be turned on always when selected “ON”. BRIGHTNESS: The brightness is decreased when selected "ON". PIXEL SHIFT: Image is slightly expanded and moves 4 directions (UP, DOWN, RIGHT, LEFT) periodically (Need setting the time for movement). Movement area is approximately +/-10mm from original position; Please locate the important information such as text within 90% area of screen image. See note (1) for this functions. PIP and STILL will be disabled when "MOTION" is active. COLOR SYSTEM * : INPUT VIDEO(S), AV only Selecting the Color System depends on your input video format. AUTO: NTSC, PAL, SECAM, PAL60 or 4.43 NTSC i...