Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
yyThe MHL passive cable is needed to connect the TV and a mobile phone. yyThis only works for the MHL-enabled phone. yySome applications can be operated by the remote control. Mobile phone Connecting to a PC Your TV supports the Plug & Play* feature and has the built-in speakers. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. NOTE yyIt is recommended to use the TV with the HDMI connection for the best image quality. yyIf you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. yyIf you turn the TV on when the set becomes cold, the screen may flicker. This is normal. yySome red, green, or blue spots may appear on the screen. This is normal. yyConnect the signal input cable and tighten it by turning the screws clockwise. yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen. yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. HDMI connection Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the TV with an HDMI connection. NOTE yyUse a High Speed HDMI™ Cable. yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yyIf you want to use HDMI-PC mode, you must set the input label to PC mode. yySupported DTV Audio: MPEG, Dolby Digital. yySupported HDMI Audio format: Dolby Digital, DTS, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/ 192k) yyChoose any HDMI input port to connect. yyIt does not matter which port you use. (Not Provided) PC HDMI to DVI connection Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. NOTE yyIf you want to use HDMI-PC mode, you must set the input label to PC mode. yyIf you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. (Not Provided) (Not Provided) PC RGB connection Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. NOTE If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. (Not Provided) PC 32 REMOTE CONTROL ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the TV. .............................................................................................. .,;@ abc def ghi jkl mnopqrsLISTSETTINGSGUIDEEXITMY APPSOKPFAVPAGEMUTEQ.VIEW tuv wxyz[ RATIOINPUTTV/ RAD RATIO Resizes an image. (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. (User Guide) Accesses the User Guide menu. INPUT Selects the input mode. Alphanumeric Buttons Enters letters and numbers. (Space) Opens an empty space on the screen keyboard. LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme. FAV Displays the selected favourite programme. 3D Uses for viewing 3D video. Adjusts the volume level. P Scrolls through the saved programmes. PAGE Moves to the previous or next screen. MUTE Mutes all sounds. REMOTE CONTROL 33 ENGLISH .............................................................................................. .,;@ abc def ghi jkl mnopqrsLISTSETTINGSGUIDEEXITMY APPSOKPFAVPAGEMUTEQ.VIEW tuv wxyz[ RAD MY APPS Shows the list of Apps. HOME Accesses the HOME menu. OK Selects menus or options and confirms your input. SETTINGS Accesses the main menu. Navigation buttons Scrolls through menus or options. (BACK) Returns to the previous level. EXIT Clears all on-screen displays and returns to TV viewing from any menu. Coloured buttons These access special functions in some menus. GUIDE Shows programme guide. Q.MENU Accesses the quick menus. SUBTITLE Recalls your preferred subtitle in digital mode. Teletext buttons These buttons are used for teletext. LIVE TV Return to LIVE TV. REC Uses to adjust DVR menu. control buttons Controls the Premium contents, DVR or Smart Share menus or the SIMPLINK compatible devices (USB or SIMPLINK or DVR). APP/* Select the MHP TV menu source. (Only Italy) (Depending on...
Эта инструкция также подходит к моделям:Мониторы - TM2792 (3.81 mb)
Мониторы - TM2792S (3.81 mb)
Мониторы - TM92D (3.81 mb)