Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации LG, модель 23ET83

Производитель: LG
Размер: 3.14 mb
Название файла:
Язык инструкции:en
Фото и характеристики  LG  23ET83
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Do you see vertical lines on the screen? Pressing the AUTO button will automatically optimize the screen to the current display mode. Do you see horizontal noise lines or does text appear blurred on the screen? Pressing the AUTO button will automatically optimize the screen to the current display mode. Touch does not work normally. Touch does not work at all. yyCheck whether the USB cable is properly connected to the PC. (No additional USB touch program installation is required.) yyCheck your operating system. The touch function is supported only on Windows 7 and Windows 8. 21 TROUBLESHOOTING ENGLISH ENG CAUTION yyCheck Control Panel > Display > Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. yyIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. yySettings can differ between computer and O/S (Operation System), and resolution mentioned above may not be supported by every video card. For graphics card related issues or to obtain the newest driver, refer to the maker of your graphics card. The display color is abnormal. Does the display appear discolored (16 color)? yySet the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. Does the display color appear unstable or in monochrome? yyCheck if the signal cable is connected properly. Reconnect the cable or reinsert the PC's video card. Are there spots on the screen? yyWhen using the monitor, pixilated spots (red, green, blue, white or black) may appear on the screen. This is normal for the LCD screen. It is not an error nor is it related to the monitor's performance. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? yyBe sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: yyMake sure to check if the video card supports Plug&Play function. The screen is flickering. Did you select the recommended resolution? yyIf the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P. HDMI The picture cannot be displayed in full screen in HDMI mode. yyDid you change the Scaling Options for your video card? yyThe HDMI Scaling Options of the AMD/ATI video card is set to Underscan by default so the picture cannot be displayed in full screen. Run Catalyst Control Center and set the Scaling Options to 0% Overscan. Touch does not respond when the desktop is extended to a second touch monitor. In Windows 7 and Windows 8, you can configure the second monitor as the touch screen as shown below. (Control Panel -> Hardware and Sound -> Tablet PC Settings -> Setup -> Setup and click the screen of the second touch monitor) Hardware and Sound> 23 SPECIFICATIONS ENG ENGLISH SPECIFICATIONS LCD Screen Type 58.42 cm TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 58.42 cm Pixel Pitch 0.2652 mm x 0.2652 mm Resolution Maximum Resolution D-Sub (Analog) : 1920 x 1080 @ 60 Hz HDMI : 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Video Signal Horizontal Frequency 30 kHz to 83 kHz Vertical Frequency 56 Hz to 75 Hz (D-Sub) 56 Hz to 61 Hz (HDMI) Synchronization Separate Sync. / HDMI Input Connector 15 pin D-SUB Connector / HDMI Connector Power Voltage 19 V 1.3 A Power consumption (Typ.) On mode: 25 W (Typ.) Power Saving Mode . 0.3 W Off Mode . 0.3 W AC/DC adaptor Type LCAP21 (24W Desk-top), manufactured by Lien Chang Electronic or Type LCAP26-E (24W Wall-mount KR/EU (except UK)), manufactured by Lien Chang Electronic Output: 19 V 1.3 A Dimension/ Weight Monitor Size (Width x Height x Depth) 554.8 mm x 399.1 mm x 207.8 mm Weight (Without Packaging) 6.4 kg Stand Angle Adjustment Forwards/Backwards: -5° to 25° (Head) Environmental Conditions Operating Condition Temperature: 10°C to 35°C; Humidity: 10% to 80% Storing Condition Temperature: -20°C to 60°C; Humidity: 5% to 90% The specifications are subject to change without notice. 24 SPECIFICATIONS ENGLISH ENG Preset Modes (Resolution) Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.500 60 +/+ Recommend Mode HDMI TIMING Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) HDMI 480P 31.50 60 O 576P 31.25 50 O...

Эта инструкция также подходит к моделям:
Мониторы - 23ET83V-W (3.14 mb)
Мониторы - 23ET83V (3.14 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории