Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики LG 22EA63V |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
IPS LED MONITOR MODEL 22EA63V 23EA63V 27EA63V ENGENGLISH ENGENGLISH TABLE OF CONTENTS 2 Contents 3 AsseMBLInG AnD PRePAR- InG 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 -Attaching the Stand Base 5 -Detaching the Stand Base 6 -Mounting on a table 8 -Mounting on a wall 9 UsInG tHe MonItoR set 9 Connecting to a PC 9 -D-SUB connection 9 -DVI-D connection 9 -HDMI connection 11 CUstoMIZInG settInGs 12 Customizing Settings 12 -Menu Settings 13 -Picture 14 -Color 15 -Display 15 -Volume 16 -Others 17 MY KEY Setting 18 FUNC. Setting 18 -Picture Mode 19 -SUPER ENERGY SAVING 20 -DUAL DISPLAY 20 -DUAL WEB 21 -MY KEY Setting 22 tRoUBLesHootInG 24 sPeCIFICAtIons 24 22EA63V 25 23EA63V 26 27EA63V 27 Preset Modes (Resolution) 27 Indicator 28 PRoPeR PostURe 28 Proper posture for using the Monitor set. ASSEMBLING AND PREPARING 3 AsseMBLInG AnD PRePARInG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. yDo not use any unapproved accessories to ensure the safety and product life span. yAny damages or injuries by using unapproved accessories are not covered by the warranty. CAUtIon stand Body stand Base CD(owner's Manual) / Card D-sUB Cable (This cable is not included in all countries.) DVI-D Cable (This cable is not included in all countries.) ( Depending on the country ) ( Depending on the country ) Power Cord AC-DC Adapter AC-DC Adapter or yThe accessories supplied with your product may vary depending on the model. yProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. note ENGENGLISH ENGENGLISH ENGENGLISH ASSEMBLING AND PREPARING 4 Parts and buttons Power Indicator yLighting on: turned on yLighting off: turned off Connection panel (See p.9) Button (See p.11) (Power Button) 5 ENEGNLGISH ASSEMBLING AND PREPARING Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body 1 2 3 Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Stand Base Stand Base Stand Body Stand Body Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3 2 6 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. 10 cm 10 cm 10 cm 10 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUTION or ASSEMBLING AND PREPARING 7 Using the Kensington security system When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. wARnInG Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. note Front Rear The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional. You can obtain it from most electronics stores. note ENGENGLISH ASSEMBLING AND PREPARING 8 Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Model 22EA63V 23EA63V VesA (A x B) 75 x 75 standard screw M4 number of screws 4 ENGENGLISH 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 ...
Эта инструкция также подходит к моделям:Мониторы - 22EA63V-P (8.89 mb)
Мониторы - 23EA63V (8.89 mb)
Мониторы - 23EA63V-P (8.89 mb)
Мониторы - 27EA63V (8.89 mb)