Оценок - , средний балл:
(
)
)
Производитель: Samsung
Размер: 894.42 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
To check the information on the operating system of your PC, right-click “My Computer” on the “Windows Desktop” and select “Properties” from the displayed menu. Check the information in the “General” tab of the “Computer Properties” window. 1. Because this USB monitor is recognized as a USB device, the DOS screen that appears for general monitors when a PC is booting up is not displayed. 2. You cannot use the USB monitor for software using 3D hardware acceleration. -Real Player (Expansion mode is not supported.) -For most 3D games -Programs running on the base of Direct X 3. Supported movie programs -Power DVD -Win DVD(Version 5 onwards) -Windows Media Player (Version 10 or later is supported.) -VLC 4. This monitor does not support the MagicTune program. -The MagicRotation function may not function normally. -If the MagicTune program is installed on your PC, it may not be compatible with this monitor. 5. The USB monitor may not work normally with USB 1.0. 6. If the graphics card of your PC does not support WDDM, the extended mode may not be available in Windows Vista. Example) Some versions of the Matrox Card Troubleshooting Check List Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. There is no image on the screen. I cannot turn on the monitor. Q: Check whether the USB cable is connected correctly. Check whether the USB driver is installed. A: The USB monitor is recognized as a general USB device on a PC. If you turn the monitor on or off quickly and repeatedly, a USB device problem may occur. Refer to the USB device Troubleshooting section on the Microsoft customer support website. 1. Right-click the “My Computer” and click on “Properties” 2. The Device Manager is displayed. 3. From the “Action” menu, click ”Scan for hardware changes”. Reboot your PC. The screen of the USB monitor freezes. Q: Check the “Hardware acceleration” setting for your USB monitor in the “Display Properties” window. A: Set the “Hardware acceleration” value to “Full”. For more information on how to configure the settings, click here. 1. Right-click the “Windows Desktop” and click on “Properties”. 2. The “Display Properties” window appears. Select the “Settings” tab and click on “Advanced”. 3. If the “Properties” window for your monitor is displayed, select the “Troubleshoot” tab. Move the “Hardware acceleration” slide to “Full”. My USB monitor is connected but the screen is blank. Q: Does the Auto Installation program run when your USB monitor is connected? A: Install the "USB Monitor Driver" from the provided CD. For more information on how to install the driver, refer to "Installing and Using the Software". I have connected the USB monitor but it does not boot up... Q: For the One-Board Type computer which uses an i815 chipset motherboard, change the Legacy USB support option to [Disabled] in the BIOS Setup menu and reboot the computer. A: (Example) Phoenix BIOS If you turn on the computer, the ”Press F2 to enter SETUP” message is displayed on the bottom of the screen. Press [F2] to display the BIOS Setup menu. Troubleshooting A: - Configuring the Settings Set the Advanced -> Peripheral Configuration (Integrated Peripherals) -> Legacy USB Support item to [Enabled]. Save the settings and reboot the computer. A: - Entering the BIOS Setup screen may differ for each BIOS company. Refer to the user manual for your PC. For more information, visit the Microsoft website. Q & A Q: How I can clone or extend screen mode? A: Open the”Display Properties” window and select the “Settings” tab, Q: How can I remove the “USB Monitor Installation Program” completely? A: Click “Add/Remove Programs” in the “Control Panel”. A list of “currently installed programs” is displayed. Select “Samsung UbiSync Monitor” from the list and click “Remove”. Q: The screen size of the USB monitor is larger than the actual monitor size. A: If the primary monitor has a high resolution, screens are expanded beyond the recommended resolution in Clone mode (USB monitor). Q: The screen size of the USB monitor is smaller than the actual monitor size. The screen is centered on the monitor. A: If the primary monitor has a high resolution, screens are smaller than the recommended resolution in Clone mode (USB monitor). Q: I disconnected or turned off my USB monitor but my PC still displays the old monitor information in the Display Properties window. A: The deactivated USB monitors are such that the power to them is turned off or their USB cables are disconnected. To remove this information, you have to remove the “Samsung Ubisync Monitor” program from “Add/Remove Programs” in the “Control Panel”. If you remove the program you cannot use all the connected USB monitors. If you want to use the USB monitor again, you have to setup the installation program again. Q: Icons and photos are broken or jagged i...