Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики Samsung S27B970D |
Фрагмент инструкции
Next, click “Next.” Features of the NCE Program Layout and Menu Items on the NCE Home Screen Select “Profile List” to view information on each profile. Select the Start button to perform calibration. 123451Select a tab to perform the desired functions. 2If the “Profile List” does not contain a profile, select “Default” and then start calibration. If the “Profile List” contains profiles, select a profile to edit or calibrate the profile. 3Select a profile to preview the screen. Ensure the “Profile List” contains profiles. U s i n g N C E ( N a t u r a l C o l o r E x p e r t ) 4Select More to edit a profile as follows. • Rename: Change a profile name. • Delete: Delete the selected profile. • Delete All: Delete all profiles on the list of profiles. • Export: Save the selected profile to another path. • Import: Import a profile from another path. 5Configure the system settings. Layout and Menu Items on the Uniformity Screen Perform calibration for Uniformity to optimize the display uniformity of the monitor. 1231Specify the number of blocks displayed per screen during Uniformity calibration. A greater number of blocks will increase the precision of uniformity calibration. 2Select Luminance only to perform calibration only for the brightness. Select Luminance and Color to perform calibration for both the brightness and colors. If both Luminance and Color are enabled, the color temperature uniformity will also increase after calibration. 3Specify the color temperature when performing calibration. To obtain a more accurate color temperature, it is recommended to perform Uniformity calibration before color calibration. U s i n g N C E ( N a t u r a l C o l o r E x p e r t ) Overview and Functions of the Verification Screen This screen allows you to verify the difference between the current monitor picture quality and the target value. (for calibration mode only) 121Perform color verification for the currently displayed screen compared with profiles (for calibration mode only). 2Perform Uniformity verification for the currently displayed screen (for calibration mode only). Starting Calibration If the “Profile List” does not contain a profile, select “Default” and then start calibration. If the “Profile List” contains profiles, select a profile to edit or calibrate the profile. Go to “Home screen – System settings – Profile Mode.” Basic mode 1. Select Default or a profile from the “Profile List.” Next, select the Start button. U s i n g N C E ( N a t u r a l C o l o r E x p e r t ) 4. Configure the Black Level setting. If you do not adjust the black level setting by 2. Specify the color gamut. moving the slider button, the minimum brightness will automatically be applied. 3. Configure the Brightness. The brightness level after calibration may depend on the color temperature. 5. Configure the color temperature for White Point (range: 4000K – 10000K). To select a standard brightness, click the Standard button. U s i n g N C E ( N a t u r a l C o l o r E x p e r t ) 6. Configure the R/G/B Gamma settings. If you configure LUT, the gamma curve of sRGB will be applied. • If Linear Gray is selected, DeltaE (color difference) for the gray scale changes to less than 1 after calibration. • If Deep Black is selected, the black luminance becomes darker than Linear Gray after calibration. The minimum brightness varies depending on the “Black Level” settings. 7. Start calibration. • Select the connected calibrator, then click “Next.” • Attach the calibrator to the indicated spot on the screen, then click “Next.” NOTE • Set the screensaver time to at least 30 minutes before starting measurement. • The calibration process will be performed in full screen. To cancel a calibration that is in progress, press the ESC key. U s i n g N C E ( N a t u r a l C o l o r E x p e r t ) Advanced 8. After calibration, you can compare the screens before and after the calibration using the After / Before buttons. 1. Settings required to calibrate can be configured from a single page. Click “Save” to save the calibration results to Calibration on the monitor. U s i n g N C E ( N a t u r a l C o l o r E x p e r t ) 2. Start calibration. 3. After calibration, you can compare the screens before and after the calibration using the After / Before buttons. • Select the connected calibrator, then click “Next.” Click “Save” to save the calibration results to Calibration on the monitor. • Attach the calibrator to the indicated spot on the screen, then click “Next.” NOTE • Set the screensaver time to at least 30 minutes before starting measurement. • The calibration process will be performed in full screen. To cancel a calibration that is in progress, press the ESC key. Chapter. 4 Using MHL MHL (Mobile High-Definition Link) Connect a mobile device that supports MHL to the product and view videos and photos (saved on the device) using the product screen. MHL NOTE • To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile d...
Эта инструкция также подходит к моделям:Мониторы - S27B971D (4.34 mb)
Мониторы - PLS Monitor with Built-in Calibration Engine (B970D Series) (4.34 mb)