Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
To exit OSD, highlight at the bottom of the main menu and press select button . While operating Sub-Menu, please use rotary control to select or adjust and press button to confirm. Note: If adjustment or selection of any OSD menu is not made for more than 20 seconds, the current setup will be saved and the OSD will disappear automatically. Sub Menu-1: BRIGHTNESS & CONTRAST Brightness : Adjusts background brightness 1 63% 1 10 E N Contrast : Adjusts contrast between foreground and background. 1 63% 1 Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. Sub Menu-2: SIZE & POSITION Horizontal Size : Adjusts image width 2 63% 2 A A Horizontal Position : Moves image left or right 2 63% 2 A A 11 E Vertical Size : Adjusts image height N 2 63% 2 A A Vertical Position : Moves image up or down 2 63% 2 A A Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. Sub Menu-3: GEOMETRY Pincushion : Adjusts the amount of curvature on the vertical edges. 3 63% 3 AA Trapezoid : Equalizes the length of the top and bottom edges. 3 63% 3 A A 12 E N Tilt : Tilts the image clockwise or counter-clockwise. 3 63% 3 A A Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. Sub Menu-4: COLOR TEMPERATURE 9300°K : Factory preset color temperature of 9300°K. 4 9300.K 6500.K 1 2 4 9300.K 6500.K 1 2 6500°K : Factory preset color temperature of 6500°K. 4 9300.K 6500 K 4 9300.K 6500.K 1 2 1 2 13 E 1 User 1 : User set 1 for color temperature then select R, G or B N for adjustment. R : Adjusts red intensity. G : Adjusts green intensity. B : Adjusts blue intensity. 4 R G B 63% 63% 63% 9300.K 6500.K 4 9300.K 6500.K 1 2 1 2 4 R G B 63% 63% 63% 9300.K 6500.K 1 2 4 R G B 63% 63% 63% 9300.K 6500.K 1 2 2 User 2 : User set 2 for color temperature then select R, G or B for adjustment. R : Adjusts red intensity. G : Adjusts green intensity. B : Adjusts blue intensity. 4 R G B 63% 63% 63% 9300.K 6500.K 4 9300.K 6500.K 1 2 1 2 4 R G B 63% 63% 63% 9300.K 6500.K 1 2 4 R G B 63% 63% 63% 9300.K 6500.K 1 2 Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. 14 E Sub Menu-5: SPECIAL N Manual Degauss : Discoloration of the image can be caused by gradual magnetization of the monitor components. This is particularly likely to occur when the monitor is moved or rotated. The monitor may "buzz" momentarily when the user control is selected and the image will change color and wobble for a few seconds. These effects are normal. 5 5 Moire Cancellation : Moire effect may be found in some display modes. If this is the case, please use "Moire Cancellation" function to reduce Moire effect. 5 5 63%H 63%V Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. 15 Sub Menu-6: RECALL FACTORY PRESETS E Recall : Recall brightness and contrast presets. N 77 Recall : Recall size and phase presets. 7 7 Recall : Recall geometry preset. 7 7 Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. * Whenever the signal cable is disconnected, the screen will appear a message as below: CHE CK S I GNAL CA B L E 16 E N Data Storage (A) Factory preset mode: This monitor has 11 factory-preset modes as indicated in the following table: Mode Resolution Frequence Sync polarity H(KHz) V(Hz) H V M01 VGA 640x400 31.5 70 – + M02 VGA 640x480 31.5 60 – – M03 VGA 640x480 37.5 75 – – M04 VESA 640x480 43.3 85 – – M05 SVGA 800x600 37.8 60 + + M06 SVGA 800x600 46.9 75 + + M07 VESA 800x600 53.7 85 + + M08 VESA 1024x768 48.4 60 – – M09 VESA 1024x768 60.0 75 + + M10 VESA 1024x768 68.7 85 + + M11 VESA 1280x1024 64.0 60 + + * Does not support sync-on-green. (B) User mode In addition to factory preset modes, the monitor can also provides additional 11 User-defined modes. If the input video signal is different from our factory-preset modes,the new timing data will be automatically stored. However, the displayed parameters may need to be adjusted. User can adjust the parameters via OSD, as preceding procedures which already described on "Adjustment via On-Screen-Display" section. (C) New mode The monitor is reversed for 4 new modes in case non-standard video modes are used. 17 E Automatic Power Saving N If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from keyboard, mouse or other input devices is detected, the monitor will automatically “wake up”. The following table shows the power consumption and signalling of this automatic power saving feature: Power Management Definition VESA's mode Video H-sync V-sync Power used Powersaving(%) LEDcolor ON Active Yes Yes < 100W 0% Green Stand-by Blanked No Yes < 15W 85% Yellow Suspend Blanked Yes No < 15W 85% Yellow OFF Blanked No No < 8W 92% Amber ...
Эта инструкция также подходит к моделям:Мониторы - 17C13A2E (191.38 kb)