Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Мониторы - 225P1ES/00 (1.96 mb)
Мониторы - 225P1ES/00 (1.53 mb)
Мониторы - 225P1ES/00 (1.46 mb)
Фрагмент инструкции
We recommend to contact your Philips sales representative for more information... RETURN TO TOP OF THE PAGE .. Compatibility with other Peripherals Q10: Can I connect my LCD monitor to any PC, workstation or Mac? A: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information... Q11: Are Philips LCD monitors Plug-and-Play? A: Yes, the monitors are Plug-and-Play compatible with Windows® 95, 98, 2000, XP, Vista and Linux. RETURN TO TOP OF THE PAGE.. .. .. .. .. .. .. .. LCD Panel Technology Q12: What kind of wide-angle technology is available? A: Currently, the IPS type panels offer the best Contrast Ratio, compared to MVA, or PVA technologies. TN panels have improved over the years, but still cannot match the Contrast Ratio offered by IPS panel. RETURN TO TOP OF THE PAGE Ergonomics, Ecology and Safety Standards Q13: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels?.. A: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. WARNING: Severe"burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty... .. Q14: Why is my Display not showing sharp text, and is displaying jagged characters? A: Your LCD monitor works best at its native resolution of 1680x1050@60Hz. For best display please use this resolution..... .. .. RETURN TO TOP OF THE PAGE .. .. .. .. .. .. .... .. .. .. .. .. .. .. .. .. . Safety and Troubleshooting .. . FAQs .. . Common Problems .. . Imaging Problems .. .. . Regulatory Information .. .... .. .. .. .. .. .. .. .. Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems Having this problem Check these items No Picture (Power LED not lit).. ............Make sure the power cord is plugged into the power outlet and into the back of the monitor. ............First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position... No Picture (Power LED is white blinking).. ............Make sure the computer is turned on... ............Make sure the signal cable is properly connected to your computer. ............make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable... ............The Energy Saving feature may be activated.. Screen says ............Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Set-Up Guide). ............Check to see if the monitor cable has bent pins. ............Make sure the computer is turned on... AUTO button doesn't function in VGA mode ............The auto function is applicable only in VGA-Analog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu. Note that the Auto Function is not applicable in DVI-Digital mode as it is not necessary. Imaging Problems Image is not centered ............Press the Auto button. ............Adjust the image position using the Phase/Clock of Setup in OSD Main Controls... .. Image vibrates on the screen ............Check that the signal cable is properly securely connected to the graphics board or PC... Vertical flicker appears ............Press the Auto button... ............Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls... Horizontal flicker appears ............Press the Auto button. ............Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. image appears blurred, indistinct or too dark ............Adjust the contrast and brightness on On-Screen Display. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. ............Uninterrupted display of still or static images over an extended period may cause " burn in", also known as "afterimaging " or "ghost imaging", on your screen. "Burn-in", "afterimaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. ............Always activate a moving sc...
Эта инструкция также подходит к моделям:Мониторы - 225P1EB/27 (1.89 mb)
Мониторы - 225B1CB/00 (1.89 mb)
Мониторы - 225B1CB/27 (1.89 mb)
Мониторы - 225B1CS/00 (1.89 mb)