Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Мониторы - 220S4LSB/00 (2.17 mb)
Мониторы - 220S4LSB/00 (2.13 mb)
Мониторы - 220S4LSB/00 (2.14 mb)
Мониторы - 220S4LSB/00 (2.15 mb)
Фрагмент инструкции
. “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off. Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired.The damage mentioned above is not covered under your warranty. Service . The casing cover should be opened only by qualified ser vice personnel. . If there is any need for any document for repair or integration, please contact with your local ser vice center. (please refer to the chapter of “Consumer Information Center”) . For transpor tation information, please refer to “Technical Specifications”. . Do not leave your monitor in a car/trunk under direct sun light. Note Consult a ser vice technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings.They are used as follows: Note This icon indicates impor tant information and tips that help you make better use of your computer system. Caution This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such mandated by the relevant regulator y authority. 2 1. Important 1. Important 1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment- WEEE This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EC governing used electrical and electronic appliances, this product may not be disposed of with normal household waste.You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact organization that ser ves your household or the store at which you purchased the product. Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials. how to dispose of your old monitor and packing from your sales representative. Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, ser vice and activities. From the planning, design and production stages, Philips emphasizes the impor tant of making products that can easily be recycled. At Philips, end-of-life management primarily entails par ticipation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program please visit about/sustainability/ourenvironment/ productrecyclingser vices.page 3 4 2. Setting up the monitor 2. Setting up the monitor 2.1 Installation Package contents 220S4LS/220S4LA 220S4L 220S4LC 220S4LC Install the base 220S4LS/220S4LA 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. Hold the base with both hands. (1) Gently attach the base to the column until the three guiding pins rest into the position holes. located at the bottom of the base, and secure the base to the column tightly. 1 2 Audio (Optional) VGA (Optional) DVI (Optional) Audio (Optional) VGA (Optional) DVI (Optional) 5 2. Setting up the monitor 220S4LC 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. Snap in the base in the VESA mount area. 3. Hold the base with both hands. (1) Gently attach the base to the column until the three guiding pins rest into the position holes. located at the bottom of the base, and secure the base to the column tightly. 2 1 6 2. Setting up the monitor Connec...
Эта инструкция также подходит к моделям:Мониторы - 220S4LCB/00 (2.18 mb)
Мониторы - 220S4LAS/00 (2.18 mb)
Мониторы - 220S4LAB/00 (2.18 mb)
Мониторы - 220S4LSS/00 (2.18 mb)