Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 1.62 mb Название файла: Язык инструкции:

1 While watching TV, press . 2 Select [Channel list], then press OK. 3 Select a channel, then press OK to access the channel. 4 Press to exit the channel list without changing the channel. Add your devices After you connect a device to the TV, add this device in the home menu for easy access. In the home menu, select [Add your devices], then press OK. Follow the instructions on- screen to add the device to the home menu. To remove a device from the home menu, select the item, press and select [Remove this device]. Press OK. 10 EN English Setup [Setup] in the home menu allows you to change most of the TV settings, including: • Picture or sound settings • Installation or update of T V channels • Update of T V software • Other special features 1 In the home menu, select [Setup], then press OK. 2 Select an item with the Navigation buttons, then press OK : • [Quick picture and sound settings] : Guides you through picture and sound settings. • [TV settings] : Advanced picture and sound settings. • [Search for channels] or [Search for satellite] : Guides you through antenna or satellite (if available) channel installation. • [Channel settings] or [Satellite settings] : Advanced channel settings. • [Update software] : Guides you through an update of the TV software. • [Software settings] : Advanced TV update settings. • [Watch demos] : Demos of special features available with the TV. Options Option menus offer convenient settings related to what is on-screen. 1 Press to see what options are available. 2 To exit, press again. EN 11 4 Use your product This section helps you perform basic TV operations. Switch your TV on / off or to standby To switch on • If the standby indicator is off, press (POWER) at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control. Tip • The front LED indicator does not turn on when the TV is switched on. • The TV requires some time to star t up. During this time, the TV will not respond to the remote control or side controls. This is normal behavior. 12 EN To switch to standby • Press (Standby-On) on the remote control. » The standby indicator switches to red. To switch off • Press (POWER) at the side of the TV. » The standby indicator switches off. Note • Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet. Switch channels • Press P +/- on the remote control or P /CH +/- on the side of the TV. • Press , then select [Channel list] to use the channel list. • Press to return to the previously- viewed channel. • Enter a channel number using the Numeric buttons. To view analogue or digital channels only Filter the channel list to access analogue or digital channels only. 1 In the channel list, press . 2 Select [Select list] > [Analogue] or [Digital], then press OK. Depending on your selection, only digital or analogue channels become available. Adjust TV volume To increase or decrease volume • Press +/-on the remote control. • Press +/-on the side of the TV. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound. Use the [Sound] menu to adjust headphone volume. For more information, see Set up the TV > Change picture and sound settings > More sound settings (Page 22). Watch connected devices Add new device Note • Before watching a connected device, you must add it to the home menu. • HDMI ARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu. 1 Connect and switch on the device. 2 Press . 3 Select [Add your devices], then press OK. Follow the on-screen instructions. Watch connected device 1 Press . 2 Select the device from the home menu. 3 Press OK to confirm your choice. English EN 13 5 Use more of Access teletext options your product Use teletext Select a page 1 Press . 2 Select [Text], then press OK. 3 Select a page by: • Entering the page number with the Numeric buttons. • Pressing ^ or Ў to view the next or previous page. • Pressing the Colour buttons to select a colour coded item. 4 Press to exit teletext. 1 When in teletex t, press . 2 Select an option: • [Freeze page] / [Unfreeze page] : Freezes or unfreezes the current page. • [Dual screen] / [Full screen] : Enables or disables dual screen teletext, which splits the current channel or source to the left of the screen, with teletex t on the right. • [T.O.P. overview] : Table Of Pages ( T.O.P.) teletex t broadcasts allow you to jump from one subject to another without using page numbers. • [Enlarge] / [Normal view] : For more comfor table reading, you can enlarge the teletex t page. Press the Navigation buttons to move around the enlarged screen. • [Reveal] : Hides or reveals hidden information on a page, such as solutions to riddles or puzzles. • [Cycle subpages] : Cycles through subpages automatically if subpages are available. • [Language] : Switches to a different languag...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: